Tóm tắt tài liệu kỹ thuật
SU-820FA
Engineering summary from PDF text extraction for SU-820FA. Verify every value with the OEM datasheet.
Summary
Product Identification
- Model: SU-820FA
- Membrane Type: Cross Linked Fully Aromatic Polyamide Composite
- Element Configuration: Spiral Wound
- Active Membrane Surface Area: 31.4 m² (338 ft²) (nominal)
- Nominal Membrane Surface Area: 32 m² (345 ft²)
Product Water
- Salt Rejection: 99.75 % (99.6% minimum)
- Product Flow Rate: 19 m³/day (5’020 gpd) (16.5 m³/d (4360 gpd) minimum)
Performance Test Conditions:
- Pressure: 5.5 MPa (800 psi)
- Temperature: 25 °C (77 °F)
- Feed Concentration: 3.5 % as Sea Water
- Brine Flow Rate: 80 l/min (21.1 gpm)
- Feed pH: 6.5
Operating Limits
- Recommended Operating Pressure: < 6860 kPa (70 kg/cm² / 1000 psi)
- Maximum Operating Pressure: 6860 kPa (70 kg/cm²) (1000 psi)
- Recommended Feedwater Temperature: < 35 °C (95 °F)
- Maximum Feedwater Temperature: 45 °C (113 °F)
- Feedwater Silt Density Index (SDI₁₅): < 4
- Feedwater Chlorine Concentration: 0 ppm
- pH Range, Continuous Operation: 3 - 9 (Both feed and brine water must meet this range.)
- pH Range, Chemical Cleaning: 2 - 10
- Feed Flow Rate per Vessel: < 200 l/min (52.8 gpm)
- Brine Flow Rate per Vessel: > 40 l/min (10.8 gpm)
- Brine/Permeate Flow Ratio (per element): > 6
- Pressure Drop (per Element): < 98 kPa (1 kg/cm²) (14 psi)
- Pressure Drop (per Vessel): < 196 kPa (2 kg/cm²) (29 psi)
Mechanical / Hydraulic
The physical dimensions of the element are provided in millimeters within a diagram that is not readable as text. See the official PDF for exact tabulated values and diagrams.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. For contractual data, please refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.