Quay lại Ropur Membranes
Lanxess logo

Tóm tắt tài liệu kỹ thuật

TR70-4021-HF

Engineering summary from PDF text extraction for TR70-4021-HF. Verify every value with the OEM datasheet.

Summary

Product identification

These are 4 x 21 inch tape wrap brackish elements.

  • Models: TR70-4021-HF & TRH-4021
  • Membrane Type: Crosslinked Aromatic Polyamide, Negative Charge
  • Element Configuration: Spiral Wound, Tape Wrap

Product water

Performance specifications are averaged for 100 elements after 1 hour operation, with a Product Flow Rate tolerance of +/- 15% and a minimum Salt Rejection of 98%.

ModelTypeSalt Rejection avg.Product Flow RateTest Conditions
TR70-4021-FNormal Flux99.4 %4’000 l/d (1’055 gpd)A
TR70-4021-HFHigh Flow99.4 %5’400 l/d (1’425 gpd)A
TRH-4021Low Pressure, High Flow99.0 %4’700 l/d (1’240 gpd)B

Test Conditions:

  • A:
    • Temperature: 25 °C
    • Feed Solution, Concentration: 1500 ppm NaCl
    • Feed Pressure: 15 bar
    • Brine : Permeate ratio: 5 : 1
    • Feed pH: 6.5 - 7.5
  • B:
    • Temperature: 25 °C
    • Feed Solution, Concentration: 500 ppm NaCl
    • Feed Pressure: 7.5 bar
    • Brine : Permeate ratio: 5 : 1
    • Feed pH: 6.5 - 7.5

Operating limits

  • Recommended Operating Pressure: < 15.0 kg/cm² (216 psi)
    • Maximum: 20 kg/cm² (288 psi)
  • Operating Temperature: < 35 °C (95 °F)
    • Maximum: 35 °C (95 °F)
  • pH Range, Continuous Operation: 3 - 11
  • pH Range, Chemical Cleaning: 3 - 11
  • Feed Flow Rate per Vessel: < 2’200 l/h (10 gpm)
  • Brine Flow Rate per Vessel: > 600 l/h (2.6 gpm)
  • Brine/Permeate Flow Ratio: 5 : 1
  • Pressure Drop (per Element): 0.5 kg/cm² (7 psi)
  • Pressure Drop (per Vessel): 1.0 kg/cm² (14 psi)

Feed water

  • Turbidity (SDI₁₅): < 5
  • Chlorine Concentration: 0 ppm

Mechanical / hydraulic

  • Nominal Dimensions: 4 inch (101 mm) diameter x 21 inch (533 mm) length

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.