Tóm tắt tài liệu kỹ thuật
FR80-2514-S
Engineering summary from PDF text extraction for FR80-2514-S. Verify every value with the OEM datasheet.
Summary
Product identification
- Model: FR80-2514-S
- Description: 2.5 x 14 INCH FIBER GLASS WRAP SEA WATER ELEMENT
- Membrane Type: Crosslinked Aromatic Polyamide, Negative Charge
- Origin: Made in Spain
Performance Specification and Test Conditions
The following performance data are based on the specified test conditions:
- Average Salt Rejection: 99.4%¹
- Minimum Salt Rejection: 98.5%³
- Product Flow Rate: 780 l/d (206 gpd)²
Test Conditions:
- Temperature: 25 °C (77 °F)
- Feed Solution Concentration: 32000 ppm NaCl
- Feed Pressure: 56 bar (806 psi)
- Brine : Permeate ratio: 5 : 1
- Feed pH: 6.5
Notes on Performance:
- ¹ Average value for 100 elements after 1 hour operation.
- ² Product Flow Rate +/- 20%.
- ³ Minimum Performance data are for any single element.
Mechanical / Hydraulic
The element includes:
- Antitelescoping Device
- ID Tape
- Product Collector
- Brine Seal
Dimensions:
- A = 14.0 inch (356 mm)
- B = 1.06 inch (27.0 mm)
- C = 0.75 inch (19.0 mm)
- D = 2.40 inch (61.0 mm)
Handling and Preservation
- Please rinse thoroughly prior to use.
- May contain preservation chemicals.
Disclaimer: This summary is generated from extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.