Quay lại Microdyn Nadir
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

Spira-Cel WY-UP-2440 Series

Engineering summary from PDF text extraction for Spira-Cel WY-UP-2440 Series. Verify every value with the OEM datasheet.

Summary

Product identification

The SPIRA-CEL® WY-UP-2440 Series consists of ultrafiltration (UF) modules.

Membrane material for all types is PES. The available regular membrane types and their nominal Molecular Weight Cut-Off (MWCO) are:

  • UP005: 5 kDa
  • UP010: 10 kDa
  • UP020: 20 kDa
  • UP150: 150 kDa

Mechanical / hydraulic

  • Membrane material: PES
  • Membrane area: 1.8 m²
  • Spacer thickness, diamond type: 44 mil / 1.1 mm
  • Outer wrap: Industry standard
  • Dimensions:
    • Ø Outside Module: 62 mm (+0 / -2 mm tolerance)
    • Module Length: 965 mm (+0 / -3 mm tolerance)
    • Permeate tube Length: 1016 mm (±0.5 mm tolerance)
    • Permeate tube Ø Outside: 19.05 mm (+0.1 / -0 mm tolerance)

Operating limits

Recommended operating conditions

  • Prefiltration: ≤ 75 µm
  • Cross flow (for water at 25 °C): 2 m³/h
  • Permeate pressure: 0 bar

Allowable operating conditions

  • Feed pressure, max.: 10 bar
  • Retentate pressure, min.: 0.7 bar
  • Transmembrane pressure, max.: 10 bar
  • Permeate pressure, max.: 0.35 bar
  • Pressure loss per module, max. (∆pmax): 2 bar
  • Processing temperature: 5 - 50 °C
  • pH range during filtration: 2 - 11
  • pH range during CIP: 2 - 11

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.