Quay lại Microdyn Nadir
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

FS10-FC-FUS1582

Engineering summary from PDF text extraction for FS10-FC-FUS1582. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product Name: FS10-FC-FUS1582
  • Type: Hollow Fiber UF Membrane Module

Module components

  • Filtration Type: Ultrafiltration
  • Membrane Material: Polyethersulfone
  • Molecular Cutoff: 150,000 Dalton
  • Hollow Fiber Inner Diameter: 0.8 mm
  • Membrane Area: 5.0 m²

The module components include:

  • Nozzle cap: Polysulfone (2 units)
  • Cap: Polysulfone (2 units)
  • Case: Polysulfone (1 unit)
  • O-Ring type WG-21: FPM (Fluoro rubber) (2 units)
  • Potting resin: Epoxy resin

Operating limits

  • Feed Inlet Pressure, Max.: 0.6 MPa (at room temperature)
  • Transmembrane Pressure, Max.: 0.3 MPa
  • Temperature, Max.: 98 °C
  • Applicable pH Range: 1 ~ 13

Mechanical / hydraulic

  • Standard Water Flux: 5.3 m³/h (Initial water flux by dead-end filtration with pure water under T.M.P. 0.1 MPa at 25 °C)
  • Shipping Water Flux Range: 4.0 m³/h
  • Standard Inlet Feed Flow: 3.8 m³/h (Adjusted to 1 m/sec feed velocity; optimum velocity varies by application)
  • Weight at Operation: 8.5 kg
  • Weight at Shipping: 2.5 kg
  • Standard Preservative: 1000 ppm Benzoic acid
  • Connectors:
    • Feed/Concentrate: 2S Ferrule
    • Permeate: 1S Ferrule

The document provides specific dimensions (A, B, C, D, E, F) and their corresponding values (1,129 mm, 985 mm, 72 mm, 130 mm, 89 mm, 100 mm). However, without the accompanying diagram, the exact components or module aspects these dimensions refer to cannot be clearly determined. See the official PDF for exact tabulated values and diagrams.

Disclaimer: This summary is based solely on the extracted text. It may not include all figures, footnotes, or the latest revisions present in the complete OEM PDF. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.