Quay lại Membranium
RM Nanotech logo

Tóm tắt tài liệu kỹ thuật

8040-F50-1

Engineering summary from PDF text extraction for 8040-F50-1. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product Type: Ultrafiltration membrane elements
  • Application: For ground and artesian waters clarification
  • Models: 8040-F50-1, 8040-F50-2, 8040-F50-3
  • Membrane Material: Polysulfone
  • Membrane Type: RM33PS with proteins, nanoUF
  • Molecular Weight Cut-Off (MWCO): Over 50,000 Daltons
  • Design: Spiral wound, Shrink film-wrapped (-F)

Operating limits

  • Recommended operation pressure: 0.2-1.5 MPa
  • Maximum operation pressure: 2.1 MPa
  • Maximum pressure drop: 0.1 MPa
  • Operation temperature: 4-50 °С
  • pH at operation: 2-12
  • CIP pH (short time operation): 1-13
  • Acceptable free Chlorine concentration:
    • During continuous operation: 1 mg/l
    • During disinfection (not longer than 30 min): 200 mg/l
  • Maximum feed flow: 18 m³/hr
  • Concentrate/permeate ratio on each element: Minimum 5:1
  • Turbidity: Maximum 1 NTU

Feed water

  • Primary application: Clarification of ground and artesian waters.
  • Maximum Turbidity: 1 NTU
  • SDI (for specific flow test): <1

Product water

  • Rejection by protein*: 98%
    • Test conditions for rejection: 0.1% solution of myoglobin (17 kDa) in 0.9% solution of NaCl, P=0.1 MPa, T=25°С, Recovery -15%.
  • Membrane's specific flow by demineralized water (SDI<1): Minimum 240 l/(hr·m²·0.1 MPa)

Mechanical / hydraulic

  • Overall Dimensions (Models 8040-F50-1/2/3):
    • A: 1016 mm
    • B: 203 mm
    • B' (ATD): 200 mm
    • C: 28.6 mm
  • Weight (Models 8040-F50-1/2/3): 14 kg
  • Membrane Area:
    • 8040-F50-1: 39 m² (420 ft²)
    • 8040-F50-2: 37 m² (400 ft²)
    • 8040-F50-3: 35 m² (375 ft²)
  • Spacer Thickness:
    • 8040-F50-1: 0.71 mm (28 mil)
    • 8040-F50-2: 0.79 mm (31 mil)
    • 8040-F50-3: 0.86 mm (34 mil)
  • Features: Fiberglass Shell, Brine Seal, Interconnector supplied with each element.

Disclaimer

This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions present in the official PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.