Quay lại Mann + Hummel
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

PS MP.005

Engineering summary from PDF text extraction for PS MP.005. Verify every value with the OEM datasheet.

Summary

Product identification

The TRISEP® PS Pharmaceutical MP005 Series consists of sanitary membrane elements designed for pharmaceutical applications. These elements utilize a NADIR® MP005 polyethersulfone (PES) microfiltration membrane with a nominal pore size of 0.05 µm.

Membrane Characteristics:

  • Membrane: NADIR® MP005
  • Membrane Type: Polyethersulfone (PES)
  • Nominal Pore Size: 0.05 µm

Model: TRISEP® PS MP005 8438-80

  • Membrane Area: 21.2 m² (228 ft²)
  • Feed Spacer Thickness: 80 mil
  • All models on this sheet feature a netting outer wrap and diamond-shaped feed spacers.

Operating limits

  • Maximum Operating Pressure: 10 bar (145 psi)
  • Maximum Operating Temperature: 55°C (131°F)
  • Cleaning pH Range: 1.0 – 12.0 (Refer to temperature and pH limits in our Membrane Cleaning Guides)
  • Cleaning Chlorine Tolerance: 200 ppm for sanitization at pH ≥ 10.5
  • Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing

Mechanical / hydraulic

Model: TRISEP® PS MP005 8438-80

  • Element Weight: 18 kg (40 lb) (Shipping weight is dependent on packaging material and quantity shipped.)
  • Dim. A: 965 mm (38.0 inches)
  • Dim. B: 212 mm (8.34 inches)
  • Dim. C (Inner Diameter): 31.15 mm (1.226 inches)
  • Permeate Tube: Female

Important Information

  • Start-up: MANN+HUMMEL Water & Fluid Solutions recommends flushing elements for 30 minutes at low pressure and discarding permeate during the flush prior to operation. For a more detailed procedure, refer to the Element Start-Up Guide – System Start-Up (TSG-O-005).
  • Cleaning: TRISEP® membrane elements require periodic cleaning. Refer to the Membrane Cleaning Guides.
  • Storage: TRISEP® membrane elements must be stored appropriately. Refer to Element Storage Guides (TSG-O-009 & TSG-O-010).
  • Regulatory: All models conform to USDA 3A sanitary standard 45-03, use FDA (CFR Title 21) compliant materials, comply with EU regulation (EC) No. 1935/2004 and No. 10/2011, and have Halal and Kosher certifications.

Customizable Specialty Elements

MANN+HUMMEL Water & Fluid Solutions offers a range of membranes and element designs for challenging water and process applications, including low-fouling RO, submerged UF, continuous high temperature, ultra-high pressure, and unique sanitary designs. Contact them for customization.

Disclaimer

This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.