Tóm tắt tài liệu kỹ thuật
10K UF
Engineering summary from PDF text extraction for 10K UF. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Name: TRISEP® 10k UF
- Type: Ultrafiltration Membrane
- Chemistry: Polyethersulfone (PES)
- Backing Material: Non-Woven Polyester
- Nominal M.W.C.O.: 10,000 Dalton
- Permeability (Test conditions: Clean water, 4 bar (58 psi), 20°C (68°F), crossflow operation): ≥ 70.0 LMH/bar (≥ 2.8 GFD/psi)
Operating limits
- pH Range: 1.0 – 12.0
- Chlorine Tolerance (sanitization): 200 ppm at pH ≥ 10.5
- Daily Short Term Cleaning Temperature: maximum 50°C (125°F) for 30 min
Mechanical / hydraulic
- Thickness: 160 – 200 µm
- Standard Sizes:
- A4 sample size: 210 mm x 297 mm (8.27 in x 11.69 in)
- Nominal roll size: 150 m x 1016 mm (492 ft x 40.0 in)
- Custom lengths may be available on request.
Important Information
- Initial Flush: MICRODYN-NADIR recommends flushing membrane for 30 minutes and discarding permeate during the flush prior to operation.
- Storage: Membrane shipped dry should be stored away from direct sunlight in a cool, dry place.
Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the most recent revisions of the OEM PDF datasheet. Contractual data must match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.