Tóm tắt tài liệu kỹ thuật
Sea 2
Engineering summary from PDF text extraction for Sea 2. Verify every value with the OEM datasheet.
Summary
Product identification
The SEA2 is a high rejection, excellent productivity seawater reverse osmosis (RO) element. These elements feature very high flow rates, addressing applications where flow rate and energy saving are priorities, while maintaining very good rejection.
Membrane Characteristics
- Membrane type: Polyamide RO
- Stabilized Salt Rejection: 99.4%
- Minimum Salt Rejection: 99.2%
Operating limits
- Maximum Operating Pressure: 82 bar (1200 psi)
- Maximum Operating Temperature: 45 °C (113 °F)
- Cleaning pH Range: 1.0 – 12.0
- Chlorine Tolerance: < 0.1 ppm
- Maximum Pressure Drop:
- 0.7 bar (10 psi) per element
- 4 bar (60 psi) per housing
- Maximum SDI₁₅: 5.0
- Maximum Turbidity: 1 NTU
Performance data
Performance is tested under the following conditions: 32000 ppm NaCl, 56 bar (800 psi), 25°C (77°F), 10% recovery, pH 8.0, 30 minutes operation. Flow rates will be no more than 15% below the values shown.
| Model | Permeate Flow m³/day (gpd) | Maximum Feed Flow m³/h (gpm) | Membrane Area m² (ft²) | Feed Spacer Thickness (mil) |
|---|---|---|---|---|
| Oltremare SEA2 – 2521 | 1.0 (275) | 1.38 (6) | 1.1 (12) | 28 |
| Oltremare SEA2 – 2540 | 2.5 (650) | 1.38 (6) | 2.6 (28) | 28 |
| Oltremare SEA2 - 4021 | 3 (800) | 2.72 (12) | 3.2 (35) | 28 |
| Oltremare SEA2 – 4040 | 7.4 (1950) | 3.6 (16) | 7.9 (85) | 28 |
Mechanical / hydraulic
| Model | Element Weight kg (lb) | Dim. A mm (inches) | Dim. B mm (inches) | Dim. C mm (inches) | Permeate Tube |
|---|---|---|---|---|---|
| Oltremare SEA2 – 2521 | 0.9 (2) | 533.4 (21) | 61 (2.4) | 19.1 (0.75) | Male |
| Oltremare SEA2 – 2540 | 1.8 (4) | 1016 (40) | 61 (2.4) | 19.1 (0.75) | Male |
| Oltremare SEA2 - 4021 | 1.8 (4) | 533.4 (21) | 100.3 (3.95) | 19.1 (0.75) | Male |
| Oltremare SEA2 – 4040 | 3.6 (8) | 1016 (40) | 100.3 (3.95) | 19.1 (0.75) | Male |
Notes on Dimensions:
- For male elements, "C" is the outer diameter.
- Male elements have a protruding permeate tube.
- Dimension "D" is 30.5 mm (1.2 in) for modules from 2540 to 4021.
- For the 4040 module, dimension "D" is 26.7 mm (1.05 in).
Important Information
- Start-up: Flush elements for 30 minutes at low pressure and discard permeate prior to operation.
- Cleaning: Elements must be cleaned periodically to ensure proper operation and prevent membrane damage.
- Storage: Elements must be stored appropriately to ensure proper operation and prevent membrane damage.
Disclaimer: This summary is based on the extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.