Quay lại Mann + Hummel
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

MV020 T

Engineering summary from PDF text extraction for MV020 T. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product: NADIR® MV020 T Microfiltration Membrane
  • Type: Polyvinylidene Fluoride (PVDF) microfiltration membrane
  • Description: High-flux membrane used to remove macromolecules and concentrate large organic solutes.
  • Pore Size: 0.2 micron
  • Form: Dry flat sheet rolls
  • Compliance: FDA compliant

Operating limits

  • pH Range: 1.0 – 12.0

Mechanical / hydraulic

  • Membrane Chemistry: Polyvinylidene Fluoride (PVDF)
  • Backing Material: Non-Woven Polyester
  • Nominal Pore Size: 0.2 µm
  • Permeability:
    • ≥ 700 LMH/bar
    • ≥ 28.4 GFD/psi
    • (Test conditions: Clean water, 2 bar (29 psi), 20°C (68°F), crossflow operation)
  • Thickness: 180 – 220 µm
  • Standard Sizes:
    • A4 sample size: 210 mm x 297 mm (8.27 in x 11.69 in)
    • Nominal roll size: 150 m x 1016 mm (492 ft x 40.0 in)
    • Custom lengths may be available on request.
  • Initial Flush: Flush membrane for 30 minutes and discard permeate during the flush prior to operation.
  • Storage: Membrane shipped dry should be stored away from direct sunlight in a cool, dry place. Refer to "Membrane Storage Guide – Flat Sheet Membrane (TSG-O-011)".

Disclaimer: This summary is based on the provided text extract. It may not include all figures, footnotes, or the latest revisions present in the official OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.