Quay lại Mann + Hummel
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

MP005 P

Engineering summary from PDF text extraction for MP005 P. Verify every value with the OEM datasheet.

Summary

Product identification

The NADIR® MP005 P is a polyethersulfone (PES) microfiltration membrane sheet, available in dry flat sheet rolls. It has a nominal pore size of 0.05 micron and is FDA compliant. This high-flux membrane is designed to remove macromolecules and concentrate large organic solutes.

Operating limits

  • pH Range: 0.0 – 14.0

Mechanical / hydraulic

NADIR flat sheet membrane is available in:

  • A4 sample size: 210 mm x 297 mm (8.27 in x 11.69 in)
  • Nominal roll size: 150 m x 1016 mm (492 ft x 40.0 in) Custom lengths may be available on request.

Membrane characteristics

  • Membrane Chemistry: Polyethersulfone (PES)
  • Backing Material: Polypropylene
  • Nominal Pore Size: 0.05 µm
  • Permeability: ≥ 285 LMH/bar (≥ 11.6 GFD/psi)
    • Test conditions for permeability: Clean water, 2 bar (29 psi), 20°C (68°F), crossflow operation.
  • Thickness: 210 – 250 µm

Installation / Operation

MANN+HUMMEL Water & Fluid Solutions recommends flushing the membrane for 30 minutes and discarding permeate during the flush prior to operation.

Storage

Membrane shipped dry should be stored away from direct sunlight in a cool, dry place. For detailed instructions, refer to the Membrane Storage Guide – Flat Sheet Membrane (TSG-O-011).


Disclaimer: This summary is generated from extracted text and may miss figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.