Quay lại Mann + Hummel
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

RO SWM

Engineering summary from PDF text extraction for RO SWM. Verify every value with the OEM datasheet.

Summary

Product Identification

The MICRODYN RO SWM series consists of High Rejection Seawater RO Elements, ideal for desalination applications.

  • Model: 8040-SWM-400/34
  • Membrane Chemistry: Thin-Film Composite Polyamide
  • Construction: Spiral-Wound Membrane Element with Fiberglass Outerwrap

Element Specifications

  • Permeate Flow: 28 m³/day (7,500 GPD)
    • Test conditions: 32,000 ppm NaCl, 55 bar (800 psi), 25°C (77°F), pH 8.0, 30 minutes operation. Test condition recovery is 10% for 4” models and 8% for 8” models. Flow rates will be no more than 15% below the values shown.
  • Membrane Area: 37.2 m² (400 ft²)
  • Stabilized Salt Rejection: 99.70 %
  • Minimum Salt Rejection: 99.6 %

Operating Parameters

  • Maximum Operating Pressure: 83 bar (1,200 psi)
  • Maximum Operating Temperature: 45°C (113°F)
  • Cleaning pH Range: 1.0 – 12.0
  • Chlorine Tolerance: < 0.1 ppm
  • Maximum Pressure Drop: 1 bar (15 psi) per element; 4 bar (60 psi) per housing
  • Maximum SDI₁₅: 5.0
  • Maximum Turbidity: 1 NTU

Mechanical / Hydraulic

  • Model: 8040-SWM-400/34
  • Dim. A – mm (inches): 1,016 (40.0)
  • Dim. B – mm (inches): 201 (7.9)
  • Dim. C – mm (inches): 28.6 (1.125) (Inner Diameter for Female elements)
  • Permeate Tube: Female
  • Element Weight – kg (lb): 16 (36)

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions present in the official PDF datasheet. For contractual data and complete specifications, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.