Quay lại Mann + Hummel
MANN+HUMMEL logo

Tóm tắt tài liệu kỹ thuật

MD 020 CP 2N

Engineering summary from PDF text extraction for MD 020 CP 2N. Verify every value with the OEM datasheet.

Summary

Product identification

The MICRODYN MD 020 CP 2N are Capillary Microfiltration Modules. They feature a highly porous symmetrical polypropylene membrane for the separation of suspended particles or emulsified liquids. The membrane has a very narrow pore size distribution. The modules are resistant to abrasion and mechanical damage due to their homogeneous construction, and offer unmatched chemical and pH resistance (0 – 14).

Membrane Characteristics

  • Membrane Polymer: Polypropylene (PP)
  • Inner Diameter: 1.8 mm (0.1 inches)
  • Nominal Pore Size: 0.2 µm

Module Specifications

  • Housing Material: Polypropylene (PP)
  • Potting Material: Polyurethane (PU)
  • Number of Capillaries: 40
  • Nominal Membrane Area: 0.1 m² (1.1 ft²)
  • Free Flow Area: 1.0 cm² (0.15 in²)

Operating limits

  • Temperature Range: 5 – 40 °C (41 – 104 °F)
  • Maximum TMP inside to outside:
    • 1.6 bar (23.2 psi) at 25 °C (77 °F)
    • 1.4 bar (20.3 psi) at 40 °C (104 °F)
  • Maximum Backpulse Pressure above Outlet Pressure:
    • 1.0 bar (14.5 psi) at 25 °C (77 °F)
    • 0.5 bar (7.3 psi) at 40 °C (104 °F)
  • Feed Flow Rate at Axial Velocity of 1 m/s: 360 l/h (1.6 GPM)
  • Housing Maximum Pressure: 3.0 bar (43.5 psi)

Mechanical / Hydraulic

  • Length: 500 mm (19.7 in)
  • Diameter: 25 mm (1.0 in)
  • Connection for Permeate: Hose nozzle Ø 10 mm
  • Connection for Concentrate: Hose nozzle Ø 12 mm

Important Information

Proper storage and handling are required to ensure operation and prevent membrane damage; refer to the MICRODYN MF Modules – Technical Manual and Handling Instructions. Chemical cleaning may be necessary for long-term high filtration capacity; refer to MICRODYN MF Modules – Chemical Cleaning and Handling Instructions.

Disclaimer: This summary is based on the provided text extract. It may not include all figures, footnotes, or the latest revisions of the OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.