
Tóm tắt tài liệu kỹ thuật
LFC3-LD
Engineering summary from PDF text extraction for LFC3-LD. Verify every value with the OEM datasheet.
Summary
Product identification
- Model: LFC3-LD
- Technology: Low Fouling Technology
- Configuration: Low Fouling Spiral Wound
- Membrane Polymer: Composite Polyamide
- Membrane Surface: Neutrally Charged Surface
- Membrane Active Area: 400 ft² (37.2 m²)
- Feed Spacer: 34 mil (0.86 mm)
- Packaging: All membrane elements are supplied with a brine seal, interconnector, and O-rings. Elements are enclosed in a sealed polyethylene bag containing less than 1.0% sodium meta-bisulfite solution, and then packaged in a cardboard box.
Specified Performance
- Permeate Flow: 11,000 gpd (41.6 m³/d)
- Salt Rejection: 99.7% (99.5% minimum)
Test Conditions:
- 1500 ppm NaCl solution
- 225 psig (1.55 MPa) Applied Pressure
- 77 °F (25 °C) Operating Temperature
- 15% Permeate Recovery
- 6.5 - 7.0 pH Range
Note: Permeate flow for individual elements may vary ±15 percent from the value specified.
Operating limits
- Maximum Applied Pressure: 600 psig (4.14 MPa)
- Maximum Chlorine Concentration: < 0.1 ppm
- Maximum Operating Temperature: 113 °F (45 °C)
- pH Range, Continuous (Cleaning): 2-10 (1-12)
- Maximum Feedwater Turbidity: 1.0 NTU
- Maximum Feedwater SDI (15 mins): 5.0
- Maximum Feed Flow: 85 gpm (19.3 m³/h)
- Minimum Brine Flow: 12 gpm (2.7 m³/h)
- Maximum Pressure Drop for Each Element: 15 psi (0.10 MPa)
Mechanical / hydraulic
Element Details:
- A: 40.0 inches (1016 mm)
- B: 7.89 inches (200 mm)
- C: 1.125 inches (28.6 mm)
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.