Quay lại Hydranautics Membranes
Hydranautics logo

Tóm tắt tài liệu kỹ thuật

HYDRAcap-80

Engineering summary from PDF text extraction for HYDRAcap-80. Verify every value with the OEM datasheet.

Summary

Product identification

  • Type: Capillary Ultrafiltration Module
  • Model: HYDRAcap80
  • Membrane Polymer: Hydrophilic Polyethersulfone
  • MWCO, nominal: 150,000 Daltons
  • Nominal Membrane Area: 670 ft² (62.2 m²)
  • Fiber Dimensions: ID 0.031” (0.8 mm), OD 0.055” (1.4 mm)
  • Certifications: NSF61, CA-DHS and ETV-NSF Verification

Operating limits

  • Maximum Applied Feed Pressure: 73 psig (5 bar)
  • Maximum Transmembrane Pressure: 20 psig (1.4 bar)
  • Maximum Backwash Transmembrane Pressure: 20 psig (1.4 bar)
  • Instantaneous Chlorine Tolerance: 100 ppm* (*For 15 minutes or less)
  • Instantaneous Hydrogen Peroxide Tolerance: 200 ppm* (*For 15 minutes or less)
  • Maximum Chlorine Exposure: 100,000 ppm-hrs
  • Maximum Instantaneous Feed Turbidity: 100 NTU
  • Maximum Operating Temperature: 104 °F (40 °C)
  • pH Operating Range: 4.0 - 10.0
  • Cleaning pH Range: 1.5 – 13.0
  • Operating Mode: Inside to Outside Filtration, Direct flow or Crossflow
  • Backwash Flux: 100 – 150 gfd (170 – 255 l/m²/h)
  • Backwash Duration: 30 – 60 seconds
  • Backwash Frequency: 20 – 60 minutes
  • Chemical Enhanced Backwash Frequency: 0 – 4 times per day
  • Chemical Enhanced Backwash Duration: 1 – 30 minutes
  • Disinfection Chemicals: NaOCl, H₂O₂, ClO₂ or NH₂Cl
  • Cleaning Chemicals: HCl, H₂SO₄, NaOH or Citric Acid

Product water

  • Filtrate Flow: 16.3 – 39.5 gpm (3.7 – 9.0 m³/h)
  • Filtrate Turbidity: ≤ 0.07 NTU
  • Virus removal: ≥ 4 log
  • Bacteria removal: ≥ 4 log
  • Typical Filtrate Flux Range: 35 – 85 gfd (59 – 145 l/m²/h)

Mechanical / hydraulic

  • Pipe connections: 2” Victaulic
  • Weight (average): 120 lbs (54 kg) (Shipping weight includes 1L of a 0.95% solution of sodium bisulfite preservative.)
  • Dimensions:
    • A: 83” (2108 mm)
    • B: 86 1/8” (2188 mm)
    • C: 87 1/4” (2216 mm)
    • Other indicated dimensions: 11 1/4” (258.8 mm), 6 5/16” (160.3 mm), 8 7/8” (225 mm), 9 7/8” (250.8 mm), 1 5/8” (41.3 mm). (See the official PDF for full dimensional diagram.)

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.