
Tóm tắt tài liệu kỹ thuật
HYDRAcap-60-E
Engineering summary from PDF text extraction for HYDRAcap-60-E. Verify every value with the OEM datasheet.
Summary
Product identification
- Type: Capillary Ultrafiltration Module
- Model: HYDRAcap®60-E
- Membrane Polymer: Hydrophilic Polyethersulfone
- Nominal Membrane Area: 500 ft² (46 m²)
- Fiber Dimensions: ID 0.031” (0.8 mm), OD 0.055” (1.4 mm)
- Pore Size: 0.02 micron
- Operating Mode: Inside to Outside Filtration, Direct flow or Crossflow
Performance¹
- Filtrate Flow: 11 – 30 gpm (2.7 – 6.8 m³/h)
- Filtrate Turbidity: ≤ 0.07 NTU
- Virus removal: ≥ 4 log
- Bacteria removal: ≥ 4 log
Operating limits²
- Typical Filtrate Flux Range: 35 – 85 gfd (59 – 145 L/m²/h)
- Maximum Applied Feed Pressure: 300 psig (20.7 bar)
- Maximum Transmembrane Pressure: 20 psig (1.4 bar)
- Maximum Backwash Transmembrane Pressure: 20 psig (1.4 bar)
- Instantaneous Chlorine Tolerance: 100 ppm³ (for 15 minutes or less)
- Instantaneous Hydrogen Peroxide Tolerance: 200 ppm³ (for 15 minutes or less)
- Maximum Chlorine Exposure: 200,000 ppm-hrs
- Maximum Instantaneous Feed Turbidity: 100 NTU
- Maximum Operating Temperature: 104 °F (40 °C)
- pH Operating Range: 4.0 - 10.0
- Cleaning pH Range: 1.5 – 13.0
Process conditions
- Backwash Flux: 100 – 150 gfd (170 – 255 L/m²/h)
- Backwash Duration: 30 – 60 seconds
- Backwash Frequency: 20 – 60 minutes
- Chemical Enhanced Backwash Frequency: 0 – 4 times per day
- Chemical Enhanced Backwash Duration: 1 – 30 minutes
- Disinfection Chemicals: NaOCl, H₂O₂, ClO₂, or NH₂Cl
- Cleaning Chemicals: HCl, H₂SO₄, NaOH, or Citric Acid
Mechanical / hydraulic
- Dimensions:
- Length: 59 1/8" (1502 mm)
- Diameter: 8 7/8" (225 mm)
- Shipping Weight⁴: 71 lbs (32.3 kg)
- Wet Weight: 145 lbs (65.8 kg)
Certifications
- CA-DHS Verification
¹ Typical module performance for most feedwaters. ² The limitations shown here are for general use. The values may be more conservative for specific projects to ensure the best performance and longest life of the membrane. ³ For 15 minutes or less. ⁴ Weight stated is shipping weight inside a bag including 2L of either 0.95% solution of sodium bisulfite or 30% calcium chloride preservative. It should be noted that weights of each element may vary by ~5%.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.