Quay lại Hydranautics Membranes
Hydranautics logo

Tóm tắt tài liệu kỹ thuật

ESPA2-LD-4040

Engineering summary from PDF text extraction for ESPA2-LD-4040. Verify every value with the OEM datasheet.

Summary

Product identification

  • Membrane Element: ESPA2-4040 (Low Fouling Technology)
  • Type: Low Fouling Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Membrane Active Area: 80 ft² (7.43 m²)
  • Feed Spacer: 34 mil (0.864 mm) with biostatic agent

Performance

The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

  • 1500 PPM NaCl solution
  • 150 psi (1.05 MPa) Applied Pressure
  • 77 F (25 C) Operating Temperature
  • 15% Permeate Recovery
  • 6.5 - 7.0 pH Range

Under these test conditions:

  • Permeate Flow: 2000 gpd (7.57 m³/d)
  • Salt Rejection: 99.6 % (99.4 % minimum)

Note: Permeate flow for individual elements may vary +25 or - 15 percent.

Operating limits

  • Maximum Applied Pressure: 600 psig (4.16 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113 F (45 C)
  • pH Range, Continuous (Cleaning): 2-11 (1-13)
  • Maximum Pressure Drop for Each Element: 10 psi

Feed water

  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 16 GPM (3.6 m³/h)
  • Minimum Ratio of Concentrate to Permeate Flow for any Element: 5:1

Mechanical / hydraulic

  • A: 40.0 inches (1016 mm)
  • B: 3.95 inches (100.3 mm)
  • C: 0.75 inches (19.1 mm)
  • Weight: 8 lbs. (3.6 kg)
  • Core tube extension: 1.05 inches (26.7 mm)

Packaging and Guarantees

  • All membrane elements are supplied with a brine seal, interconnector, and o-rings.
  • Elements are enclosed in a sealed polyethylene bag containing less than 1.0% sodium meta-bisulfite solution, and then packaged in a cardboard box.
  • All elements are guaranteed 99.4% minimum rejection.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the OEM's official PDF datasheet. For contractual data and complete specifications, the specific OEM PDF revision used on the project must be consulted.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.