
Tóm tắt tài liệu kỹ thuật
CPA-4040E
Engineering summary from PDF text extraction for CPA-4040E. Verify every value with the OEM datasheet.
Summary
Product identification
- Membrane Element: CPA-4040E
- Technology: Patented Low Fouling Technology
- Configuration: Spiral Wound
- Membrane Polymer: Composite Polyamide
- Membrane Active Area: 65 ft² (6.04 m²)
Performance
- Permeate Flow: 2,250 gpd (8.5 m³/d)
- Salt Rejection: 99.5% (99.2% minimum)
- Feed Spacer: 34 mil (0.864 mm) with biostatic agent
Operating limits
- Maximum Applied Pressure: 600 psig (4.14 MPa)
- Maximum Chlorine Concentration: < 0.1 PPM
- Maximum Operating Temperature: 113 °F (45 °C)
- pH Range, Continuous (Cleaning): 2-10 (1-12)
- Maximum Feedwater Turbidity: 1.0 NTU
- Maximum Feedwater SDI (15 mins): 5.0
- Maximum Feed Flow: 16 GPM (3.6 m³/h)
- Minimum Ratio of Concentrate to Permeate Flow for any Element: 5:1
- Maximum Pressure Drop for Each Element: 15 psi
- Dry Element Temperature Storage: -40 °C to 40 °C (-40 °F to 104 °F)
- Wet Element Temperature Storage: 1 °C to 35 °C (33 °F to 95 °F)
Test Conditions
The stated performance is based on the following conditions after 30 minutes of stabilized operation:
- 1500 PPM NaCl solution
- 225 psi (1.55 MPa) Applied Pressure
- 77 °F (25 °C) Operating Temperature
- 15% Permeate Recovery
- 6.5 - 7.0 pH Range
Mechanical / hydraulic
- A (length): 40.00 inches (1016 mm)
- B (diameter): 3.95 inches (100.3 mm)
- C (brine seal/interconnector end): 0.75 inches (19.1 mm)
- Weight: 7 lbs. (3.2 kg)
- Core tube extension: 1.05" (26.7 mm)
Packaging
- Permeate flow for individual elements may vary + 33 or - 15 percent.
- All membrane elements are supplied with a brine seal, interconnector, and o-rings.
- Elements are enclosed in a sealed polyethylene bag in a dry condition (no aqueous preservative), and then packaged in a cardboard box.
Disclaimer: This summary is based on the provided text extract. The original PDF may contain additional figures, footnotes, or more recent revisions. For contractual purposes, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.