Tóm tắt tài liệu kỹ thuật
FilmTec™ SW30XLE-400
Engineering summary from PDF text extraction for FilmTec™ SW30XLE-400. Verify every value with the OEM datasheet.
Summary
Product identification
The FilmTec™ SW30XLE-400 Element is a premium seawater reverse osmosis (RO) element. It offers a combination of productivity and rejection, suitable for two-pass seawater designs and high Total Dissolved Solids (TDS) brackish water applications.
Product Type
Spiral-wound element with polyamide thin-film composite membrane.
Typical Properties
These values are normalized to the following conditions: 32,000 ppm NaCl, 5 ppm boron, 800 psi (5.5 MPa), 77°F (25°C), pH 8, 8% recovery. Permeate flows for individual elements may vary ± 15%. Minimum Salt Rejection is 99.6%. Stabilized salt rejection is generally achieved within 24–48 hours of continuous use.
- Active Area: 400 ft² (37 m²)
- Feed Spacer Thickness: 28 mil
- Permeate Flowrate: 9,000 gpd (34 m³/d)
- Stabilized Boron Rejection: 91.5%
- Stabilized Salt Rejection: 99.8%
Dimensions
- A: 40.0 in (1,016 mm)
- B: 1.125 in ID (29 mm ID)
- C: 7.9 in (201 mm)
The element is designed to fit a nominal 8-inch (203-mm) I.D. pressure vessel.
Operating and Cleaning Limits
- Maximum Operating Temperature: 113°F (45°C)
- Maximum temperature for continuous operation above pH 10 is 95°F (35°C).
- Maximum Operating Pressure: 1,200 psig (83 bar)
- Maximum Element Pressure Drop: 15 psig (1.0 bar)
- pH Range (Continuous Operation): 2 – 11
- pH Range (Short-term Cleaning - 30 min): 1 – 13
- Maximum Feed Silt Density Index (SDI): SDI 5
- Free Chlorine Tolerance: < 0.1 ppm
Additional Important Information
- The use of this product does not necessarily guarantee the removal of cysts and pathogens from water; effective reduction depends on complete system design, operation, and maintenance.
- Permeate obtained from the first hour of operation should be discarded.
Disclaimer
This summary is based on the provided text extract. The original OEM PDF datasheet may contain additional figures, footnotes, or revisions not captured here. For contractual data and the most up-to-date information, always refer to the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.