Quay lại Filmtec Membranes
DuPont logo

Tóm tắt tài liệu kỹ thuật

Eco Pro-440

Engineering summary from PDF text extraction for Eco Pro-440. Verify every value with the OEM datasheet.

Summary

Product identification

The FilmTec™ Eco Pro-440 Element is a spiral-wound element featuring a polyamide thin-film composite membrane. It is designed for reverse osmosis plant managers and operators who use controlled pre-treatment waters and require advanced membrane treatment for high water purity and low energy consumption.

Key features include:

  • High salt-rejection at low pressure.
  • Excellent silica, boron, nitrate, TOC, and ammonium rejection.
  • Increased active area with effective cleaning performance, robustness, and durability due to its wide cleaning pH range (1-13) and chemical tolerance.

Operating limits

  • Maximum Operating Temperature: 113°F (45°C)
    • Note: Maximum temperature for continuous operation above pH 10 is 95°F (35°C).
  • Maximum Operating Pressure: 600 psig (41 bar)
  • Maximum Element Pressure Drop: 15 psig (1.0 bar)
  • pH Range, Continuous Operation: 2 – 11
  • pH Range, Short-Term Cleaning (30 min.): 1 – 13
  • Maximum Feed Silt Density Index (SDI): SDI 5
  • Free Chlorine Tolerance: < 0.1 ppm

Feed water

DuPont Water Solutions recommends removing residual free chlorine by pretreatment prior to membrane exposure, as its presence can cause premature membrane failure.

Product water

This element offers high water purity and high rejection rates for various contaminants.

Performance based on standard test conditions (2,000 ppm NaCl, 150 psi (10.3 bar), 77°F (25°C), pH 8, 15% recovery):

  • Typical Permeate Flow Rate: 12,650 GPD (48 m³/d)
  • Typical Stabilized Salt Rejection: 99.7%
  • Minimum Salt Rejection: 99.4%

Salt rejection is generally achieved within 24-48 hours of continuous use.

Note on Cysts and Pathogens: The use of this product does not guarantee the removal of cysts and pathogens from water. Effective reduction depends on the complete system design, operation, and maintenance.

Mechanical / hydraulic

  • Element Type: Spiral-wound element
  • Active Area: 440 ft² (41 m²) (guaranteed ± 3%)
  • Feed Spacer Thickness: 28 mil

Dimensions (nominal):

  • Length (A): 40.0 in. (1,016 mm)
  • Internal Diameter (B): 1.125 in. ID (29 mm ID)
  • Outer Diameter (C): 7.9 in. (201 mm)

The element is designed to fit a nominal 8-inch (203-mm) I.D. pressure vessel.


Disclaimer: This summary is based on the provided text extraction and may not include all figures, footnotes, or the latest revisions from the original PDF datasheet. For contractual data and complete specifications, the official OEM PDF revision used on the project must be consulted.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.