Quay lại Taco Pumps
Taco logo

Tóm tắt tài liệu kỹ thuật

2400 series pumps

PDF datasheet mirror for 2400 series pumps (Taco Pumps). Verify with OEM before design.

Summary

Product identification

2400 Series High Capacity Circulators

  • Effective: March 1, 2015
  • Supersedes: December 19, 2014

Model Nomenclature

  • S – Stainless Steel, Flanged
  • Y – 230V/60/1Motor

Operating limits

Performance Data

  • Maximum Flow: 90 GPM
  • Maximum Head: 46 Feet
  • Minimum Fluid Temp: 40˚F (4˚C)
  • Maximum Fluid Temp: 225˚F (107˚C)
  • Maximum Working Pressure: 150psi

Electrical

Motor Type

  • Open drip proof, permanent split capacitor, thermally protected

Electrical Data

Model NumberHzPhAmps (115 V)Amps (230 V)RPMHP
2400-10-3P6011.40.5434501⁄10
2400-20-3P1.91.01⁄6
2400-30-3P1.91.01⁄6
2400-40-3P1.91.01⁄6
2400-45-3P3.61.71⁄3
2400-50-3P4.92.41⁄2
2400-60-3P1.91.01⁄6
2400-65-3P3.61.71⁄3
2400-70-3P4.92.41⁄2

Mechanical / hydraulic

Materials of Construction

  • Casing: Cast Iron or Stainless Steel
  • Seal Face Plate: Stainless Steel
  • Motor Housing: Aluminum
  • Impeller: 30% Glass-filled Noryl®
  • Impeller Insert: Stainless Steel
  • Shaft: Stainless Steel
  • Mechanical Seal: Carbon/Silicon-Carbide
  • Motor Bearings: Permanently lubricated ball bearing
  • O-Ring/Flange Gaskets: EPDM

Pump Dimensions & Weights All dimensions and weights are approximate.

MODEL NO.CAST IRON MODELSTAINLESS STEEL MODELA (IN./MM)B (IN./MM)C (IN./MM)D (IN./MM)E (IN./MM)F (IN./MM)SHIP WEIGHT (LBS./KG)
2400-10-3P2400-10-3P2400-10S-3P63⁄8 / 16241⁄2 / 11433⁄16 / 8267⁄8 / 1755 / 12733⁄4 / 9511.5 / 5.3
2400-20-3P2400-20-3P2400-20S-3P63⁄8 / 16241⁄2 / 11433⁄16 / 8267⁄8 / 1755 / 12733⁄4 / 9512.0 / 5.5
2400-30-3P2400-30-3P2400-30S-3P81⁄2 / 21643⁄4 / 12141⁄4 / 1088 / 20351⁄4 / 13333⁄4 / 9514.5 / 6.6
2400-40-3P2400-40-3P2400-40S-3P81⁄2 / 21643⁄4 / 12141⁄4 / 1088 / 20351⁄4 / 13333⁄4 / 9514.5 / 6.6
2400-45-3P2400-45-3P2400-45S-3P63⁄8 / 16245⁄8 / 11933⁄16 / 8283⁄4 / 22267⁄8 / 17533⁄4 / 9515.0 / 6.8
2400-50-3P2400-50-3P2400-50S-3P63⁄8 / 16245⁄8 / 11933⁄16 / 8283⁄4 / 22267⁄8 / 17533⁄4 / 9516.0 / 7.3
2400-50/2-3P2400-50/2-3P2400-50S/2-3P63⁄8 / 16251⁄4 / 13333⁄16 / 8283⁄4 / 22267⁄8 / 17533⁄4 / 9516.5 / 7.5
2400-60-3P2400-60-3P2400-60S-3P81⁄2 / 21653⁄16 / 13241⁄4 / 10877⁄8 / 20051⁄4 / 13333⁄4 / 9518.0 / 8.2
2400-65-3P2400-65-3P2400-65S-3P81⁄2 / 21651⁄2 / 14041⁄4 / 10897⁄8 / 25171⁄4 / 18433⁄4 / 9522.0 / 10.0
2400-70-3P2400-70-3P2400-70S-3P81⁄2 / 21651⁄2 / 14041⁄4 / 10897⁄8 / 25171⁄4 / 18433⁄4 / 9523.0 / 10.4
2400-70/3-3P2400-70/3-3P2400-70S/3-3P81⁄2 / 21665⁄8 / 16841⁄4 / 108101⁄2 / 26771⁄4 / 18433⁄4 / 9529.0 / 13.2

2400 Series Companion Flange Sets

ModelsCONNECTION3⁄4"1"11⁄4"11⁄2"2"21⁄2"3"
2400-10/10S-3PIron NPT110-251F110-252F110-253F110-254F–––
2400-20/20S-3PS. Steel NPT110-251SF110-252SF110-253SF110-254SF–––
2400-45/45S-3PBronze SWT110-523BSF110-524BSF110-525BSF110-526BSF–––
2400-50/50S-3PShut-Off NPTSF-075TSF-100TSF-125TSF-150T–––
Shut-Off SWTSF-075SSF-100SSF-125SSF-150S–––
2400-50/50S/2-3P2", 2 bolt Iron NPT––––194-2124F––
S. Steel NPT––––194-2124SF––
2400-30/30S-3PIron NPT––194-1540F194-1542F–––
2400-40/40S-3PS. Steel NPT––194-1540SF194-1542SF–––
Shut-Off NPT––SF-125T-0012SF-150T-0012–––
Shut-Off SWT––SF-125S-0012SF-150S-0012–––
2400-60/60S-3PIron NPT––––185-086C––
2400-65/65S-3PBronze NPT––––185-086B––
2400-70/70S-3P
2400-70/70S/3-3P3", 4 bolt Iron NPT–––––185-112C185-113C
Bronze NPT–––––185-112B185-113B

General Notes

  • For indoor use only.
  • Mounting positions are illustrated in the official PDF, with specific recommendations for flow direction.
  • Stainless Steel models only.

Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions from the complete OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.