Quay lại KSB Pumps
KSB logo

Tóm tắt tài liệu kỹ thuật

RSR

PDF datasheet mirror for RSR (KSB Pumps). Verify with OEM before design.

Summary

Product identification

The RSR is a reactor coolant pump designed for pressurized water reactors.

Applications

  • Reactor coolant recirculation in nuclear power stations (PWR, PHWR)

Key Features

  • 100 % tightness: Achieved with three mechanical seals (double-redundant) plus two standstill seals.
  • Integrity under upset conditions: Mechanical seals are cooled through a thermosyphon effect.
  • Operational safety: Features a product-lubricated guide bearing.
  • Perfect rotor alignment: Ensured by Hirth-type serration of rotor connections.
  • Optimized hydraulics: Includes tailor-made impeller/diffuser combinations and undergoes model and full-load performance tests.
  • Available in RSR cast design and RSR forged design.

Operating limits

  • Size: up to DN 750
  • Capacity: up to 24,000 m³/h (105,669 gpm)
  • Head: up to 215 m (705 ft)
  • Operating pressure: up to 175 bar (17.5 MPa (a))
  • Temperature: up to + 350 °C (662 °F)
  • Speed: up to 1,800 min⁻¹
  • Frequency: available in 50/60 Hz
  • *Higher ratings are available on request.

Disclaimer

This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF. Contractual data for any project must always match the specific OEM PDF revision used for that project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.