Quay lại Flygt Pumps
Flygt logo

Tóm tắt tài liệu kỹ thuật

Concertor DP N80-7800

PDF datasheet mirror for Concertor DP N80-7800 (Flygt Pumps). Verify with OEM before design.

Summary

Product identification

The Concertor DP N80-7800 is a process-controlled wastewater pumping system. It consists of multiple pumps and one gateway per pump, designed for customers with specialized process control algorithms.

Key benefits include:

  • Lower capital costs

  • Smaller control cabinets

  • Higher pump system efficiencies

  • Clog detection and pump cleaning

  • Installation type: P - Semi Permanent, Wet

Operating limits

  • Gateway operation temperature: -20˚C to +70˚C

Electrical

Motor

  • Phases: 3~
  • Nominal voltage: 400 V
  • Nominal power: 7.3 kW
  • Rated speed: 800-3216 rpm
  • Rated current: 12 A
  • Starting current: 12 A
  • Frequency: 50/60 Hz
  • Set power: 7800 W

Gateway Power Supply

  • Power Supply: 24 V DC

Mechanical / hydraulic

Pump

  • Suction side diameter: DN80 [3"]
  • Discharge connection: 80 mm
  • Weight (Pump): 108 kg (238 lbs)
  • Weight (Stand): 34 kg (75 lbs)

Impeller

  • Material: Grey cast iron
  • Diameter: 170 mm
  • Number of blades: 2

Performance

Performance curves for head, flow, and efficiency are provided in the official PDF, based on "Schoon water" (clean water) conditions and ISO curves. See the official PDF for exact tabulated values and detailed curves.

Control and Monitoring (Gateway)

A gateway is included with each pump.

  • Ports:
    • 1 x USB
    • 1 x RS485
    • 1 x Ethernet RJ 45
    • 1 x Display interface, CAN
  • Communication:
    • Modbus RTU
    • Modbus TCP
  • Standard I/O:
    • 4 x Digital outputs
    • 4 x Digital inputs
    • 1 x Analog input
    • 1 x Analog output
  • Pump Interface: 1 x Pump Communication Port
  • User Interface:
    • 14 x LED
    • 1 x Rotator Switch
  • Data Logging: 1000 data points
  • Protection class: IP 20
  • Software Version: DP software – Variable performance control via external signal, status and alarms
  • Approvals: CE, UL, CSA
  • Interface (HMI): None

Dimensions

A detailed dimensional drawing with measurements in millimeters and inches is available in the official PDF.


Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.