
Tóm tắt tài liệu kỹ thuật
SLP-160-5
PDF datasheet mirror for SLP-160-5 (FEDCO Pumps). Verify with OEM before design.
Summary
Product identification
- Model: SLP-160-5
- Pump Type: Single Stage, end suction, centrifugal, closed-coupled
Operating limits
- Pump Operating Ambient Temperature: 33 - 158 °F (0.6 - 70.0 °C)
- Maximum Storage Temperature: 185 °F (85.0 °C)
- Pump Operating Flow Range: 282 - 1057 gpm (64 - 243.1 m³/h)
- Maximum Rated Flange Pressure: 270 psi (19 bar)
- Maximum Solid Size: 0.125 in (3.175 mm)
- Head (nominal): 167 Ft (50.9 M)
- PEICL Range: 0.91-0.94 (Motor Dependent)
- Peak Efficiency: Up to 80%
Feed water
- Liquid: Seawater, Brackish water, Fresh Water
Electrical
- Motor Manufacturer: WEG or equivalent
- Motor Type: NEMA
- Motor Ambient Temperature: -4 - 104 °F (-20 - 40 °C)
- Motor Specifications:
| Power Rating | Service Factor | Efficiency | Full Load Amps | Frame | Enclosure | Electric Power | Motor Weight |
|---|---|---|---|---|---|---|---|
| 50 HP-460/60/3 | 1.25 | 93.00% | 56.1 | 326 JM | TEFC | 37 kW | 590 lbs [268 kg] |
| 40 HP-380/50/3 | 1.00 | 93.3% | 54.9 | 326 JM | TEFC | 30 kW | 590 lbs [268 kg] |
| 30 HP-460/60/3 | 1.25 | 91.70% | 33.8 | 286 JM | TEFC | 22 kW | 412 lbs [187 kg] |
| 25 HP-380/50/3 | 1.00 | 92.40% | 34.2 | 286 JM | TEFC | 18.5 kW | 412 lbs [187 kg] |
| 20 HP-460/60/3 | 1.25 | 91.00% | 23.2 | 256 JM | TEFC | 15 kW | 288 lbs [131 kg] |
| 15 HP-380/50/3 | 1.15 | 91.20% | 20.4 | 256 JM | TEFC | 11 kW | 288 lbs [131 kg] |
Mechanical / hydraulic
- Materials:
- Casing: Zeron SS (ASTM A995-13 6A)
- Bearings: Non-metallic
- Motor Adapter: 316 SS
- Optional Baseplate: Carbon Steel - Painted (A36)
- Mechanical Seal - Type 21: SiC/ Graphite
- O-Rings: Buna N®
- Impeller: Zeron SS (ASTM A995-13 6A)
- Weights:
- Pump Package Weight: 865 lbs (393 kg)
- Pump Weight (with base): 275 lbs (125 kg)
- Dimensions:
- Full Impeller Diameter: 7.500 in (190.5 mm)
- Fittings:
- Pipe Joints: Flange: ASME/ANSI B16.5 Class 150
- Feed Inlet: 5”
- Feed Outlet: 3”, 300#
- Pipe Joints: Flange: ASME/ANSI B16.5 Class 150
- Lubrication & Cooling: Product fluid cooling and lubrication
- Crating/Packaging:
- Crating/Packaging: Export-Wood
- Protective Covers: Standard
- Export Crating: Standard
- Additional Shipping Options: Available per customer request
- Testing and Inspection:
- Hydrostatic Test: Standard
- Mechanical Run Test: Standard
- Factory Duty Point Hydraulic Performance Test: Not Available
- Material Certificates: Optional
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.