Quay lại DAB Pumps
DAB logo

Tóm tắt tài liệu kỹ thuật

Grinder 1000-1200-1600

PDF datasheet mirror for Grinder 1000-1200-1600 (DAB Pumps). Verify with OEM before design.

Summary

Product identification

The DAB GRINDER 1000, 1200, and 1600 series are submersible centrifugal pumps equipped with a cutting system, designed for pumping domestic wastewater with typical solid additives. The cutting system is positioned upstream of the pump hydraulics to reject solids that cannot be transported.

Models and Codes:

  • Grinder 1000 M-A: 60141604
  • Grinder 1000 M-NA: 60141603
  • Grinder 1000 T: 60141602
  • Grinder 1200 M-A: 60141601
  • Grinder 1200 M-NA: 60141600
  • Grinder 1200 T: 60141599
  • Grinder 1600 M-A: 60141587
  • Grinder 1600 M-NA: 60141585
  • Grinder 1600 T: 60141588

Operating limits

  • Operating range: 0 to 22 m³/h with head up to 25 mt
  • Liquid temperature range: From 0° to +40°
  • Maximum immersion depth: 10 mt
  • Duty: Continuous, with pump completely immersed
  • Installation: Portable, in vertical position
  • Free passage: 5mm

Feed water

  • Liquid quality requirements: Not aggressive sewage, drain water
  • Suitable for domestic wastewater with usual solid addictions.

Electrical

  • Motor type: Dry type asynchronous sealed motor
  • Motor protection level: IP 68
  • Insulation class: F
  • Rotor: Mounted on ball bearings
  • Single-phase version features: Capacitor current protection in an external control box (supplied with pump). Can be equipped with a float switch for automatic starting and stopping.
  • Power cable: Supplied as standard with 10 mt H07RN-F power cable.

Electrical Data (50 Hz):

  • Grinder 1000 M-A / M-NA:
    • Voltage: 1x220 - 240 V~
    • P1 MAX: 1.5 kW
    • P2 NOMINAL: 1 kW
    • HP: 1.3
    • In: 8 A
    • CAPACITOR: 30+40 µF
    • VC: 450
  • Grinder 1000 T:
    • Voltage: 3x400 V~
    • P1 MAX: 1.6 kW
    • P2 NOMINAL: 1 kW
    • HP: 1.3
    • In: 2.8 A
  • Grinder 1200 M-A / M-NA:
    • Voltage: 1x220 - 240 V~
    • P1 MAX: 2.8 kW
    • P2 NOMINAL: 1.5 kW
    • HP: 2.0
    • In: 12.7 A
    • CAPACITOR: 35+40 µF
    • VC: 450
  • Grinder 1200 T:
    • Voltage: 3x400 V~
    • P1 MAX: 2.7 kW
    • P2 NOMINAL: 1.5 kW
    • HP: 2.0
    • In: 4.7 A
  • Grinder 1600 M-A / M-NA:
    • Voltage: 1x220 - 240 V~
    • P1 MAX: 3.8 kW
    • P2 NOMINAL: 1.8 kW
    • HP: 2.4
    • In: 16.8 A
    • CAPACITOR: 35+40 µF
    • VC: 450
  • Grinder 1600 T:
    • Voltage: 3x400 V~
    • P1 MAX: 3.3 kW
    • P2 NOMINAL: 1.8 kW
    • HP: 2.4
    • In: 5.8 A

Mechanical / hydraulic

  • Materials:
    • Cover, motor body, hydraulic section, and impeller: Cast iron ENGJL 200
    • Grinding device: AISI440C
  • Mechanical seal: Carbon/alumina double mechanical seal

Dimensions and Weights: The provided text includes two tables for dimensions and weights. However, only the Grinder 1000 model has complete data in these tables. For Grinder 1200 and Grinder 1600, only the weight is specified in one table, and other dimensions are not provided in the extract.

  • Grinder 1000:

    • A: 445
    • B: 145
    • C: 270
    • E: 110
    • DNM GAS: 2”
    • Q.TY x PALLET: 6
    • WEIGHT: 38 KG
  • Grinder 1200:

    • WEIGHT: 39 KG
  • Grinder 1600:

    • WEIGHT: 40 KG
  • Additional Grinder 1000 Dimensions:

    • A: 50
    • B: 160
    • C (DIAM): 3/4"
    • D: 2"G
    • E: 540
    • F: 85
    • G: 410
    • H: 38
    • I: 130
    • L: 94

See the official PDF for exact tabulated values for all models and complete dimensional drawings.


Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.