
Tóm tắt tài liệu kỹ thuật
Drenag 1400-1800
PDF datasheet mirror for Drenag 1400-1800 (DAB Pumps). Verify with OEM before design.
Summary
Product identification
- Models and Codes:
- DRENAG 1400 M: 103010040
- DRENAG 1800 T: 103010160
Operating limits
- Operating range: 6 to 33 m³/h
- Head up to 19,2 mt (single-phase version)
- Head up to 21,5 mt (three-phase version)
- Liquid temperature range: 0°C to +55°C
- Free passage through suction grid: 12 mm
- Maximum immersion depth: 10 mt
Feed water
- Liquid quality requirements: Sandy, muddy, or sludgy water from building sites; clean waste water; rain water; ground water; fountain, river, or lake water. Always non-aggressive.
Electrical
- Motor type: Continuous duty submersible induction motor, in a watertight casing. Rotor mounted on oversized greased sealed-for-life ball bearings. Thermal protection in the windings, to be connected to the control panel.
- Power cable: 10 mt of neoprene rubber power cable.
- Control system: Pumps must be equipped with a control and protection system, supplied separately and not connected to the electropumps.
- Electrical Data (50 Hz):
- DRENAG 1400 M (Single-phase)
- Voltage: 1X230 V~
- P1 MAX: 2 kW
- P2 NOMINAL: 1,1 kW (1,5 HP)
- In: 9,2 A
- Capacitor: 40 µF, 450 Vc
- DRENAG 1800 T (Three-phase)
- Voltage: 3X400 V~
- P1 MAX: 2,3 kW
- P2 NOMINAL: 1,5 kW (2,0 HP)
- In: 4,4 A
- DRENAG 1400 M (Single-phase)
Mechanical / hydraulic
- Construction materials:
- Pump body, motor casing, adjustment ring impeller: Cast iron
- Adjustment disk: Cast iron coated with abrasion-proof rubber
- Shaft, handle, filter, bolts, screws: Stainless steel
- Mechanical seal: Silicon/carbide, with inspectionable oil chamber
- Installation: Fixed or portable in a vertical position.
- Discharge connection: 2” GAS (DNM)
- Weights:
- DRENAG 1400 M: 44,2 KG
- DRENAG 1800 T: 44 KG
- Dimensions: See the official PDF for exact tabulated values.
Disclaimer: This summary is based on extracted text and may miss figures, footnotes, or recent revisions. Contractual data must always match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.