
Tóm tắt tài liệu kỹ thuật
FIL30C / FIL30P
PDF datasheet mirror for FIL30C / FIL30P (Corode Pumps). Verify with OEM before design.
Summary
Product identification
Corode filter units, FIL30..M series, are supplied with a Corode magnetic drive pump, model MAG-30.
Operating limits
- Maximum flow rate (Q max): 35 m³/h
- Minimum flow rate (Q min): 2.8 m³/h
- Maximum temperature (filter housing): 80°C
Electrical
- Motor:
- Power: 2.2 kW
- Voltage: 400 V
- Current: 7.6/4.4 Amp
- Phase: 3Ph
- Frequency: 50 Hz
- Ingress Protection: IP55
Mechanical / hydraulic
- General:
- Filter housing material: PP
- Outside metal: SS316
- Pump head material: PP
- Dimensions (L x W x H):
- FIL30CM PP: 60 cm x 50 cm x 120 cm
- FIL30PM PP: 60 cm x 50 cm x 120 cm
- FIL30C30M PP: 60 cm x 50 cm x 145 cm
- FIL30P30M PP: 60 cm x 50 cm x 145 cm
- FIL30P40M PP: 60 cm x 50 cm x 170 cm
- Connections:
- Suction pump connection: Ø50mm
- Outlet filter unit connection: Ø50mm
- Filter Media & Area:
- FIL30CM PP: Cartridge 15x20”, 9.90 m²
- FIL30PM PP: Paper 66xØ295, 4.30 m²
- FIL30C30M PP: Cartridge 15x30”, 14.85 m²
- FIL30P30M PP: Paper 95xØ295, 6.45 m²
- FIL30P40M PP: Cartridge 15x40”, 18.15 m²
- Filter Housing Height Options: 20”, 30”, 40”
Features
- Standard units include:
- Thermal overload switch
- Air release/drain valve
- Pressure gauge
- Filter media (Cartridge, paper)
- Optional:
- Dry run protector
- Hand priming pump
- Transport wheels
- Precoat tank PP 20”xØ337 (36 liter)
Disclaimer
This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.