
Tóm tắt tài liệu kỹ thuật
FIL07C / FIL07P
PDF datasheet mirror for FIL07C / FIL07P (Corode Pumps). Verify with OEM before design.
Summary
Product identification
Corode filter units, models FIL07..M, are supplied as a complete unit with a magnetic drive pump (MAG-07).
Operating limits
- Maximum Flow Rate (Q max): 6.5 m³/h
- Minimum Flow Rate (Q min): 0.6 m³/h
- Maximum Temperature (PP filter housing): 80°C
- Maximum Temperature (PVDF filter housing): 100°C
Electrical
The unit includes a motor with the following specifications:
- Power: 0.25 kW
- 3-Phase: 400V, 1.23/0.71 Amp, 50Hz, IP55
- 1-Phase: 230V, 2.2 Amp, 50Hz, IP55
Mechanical / Hydraulic
- General Flow Rate: 6500 l/h
- Filter Housing Material: PP or PVDF
- Pump Head Material: PP or PVDF
- Outside Metal: SS316
- Connection (Suction Pump): Ø32mm
- Connection (Outlet Filter Unit): Ø32mm
- Filter Media Types: Cartridge, Paper
- Filter Housing Heights: 10”, 20”, 30”
Model Specific Data
| Model | Housing Material | L (cm) | W (cm) | H (cm) | Filter Media | Filter Area (m²) |
|---|---|---|---|---|---|---|
| FIL07CM PP | PP | 45 | 35 | 85 | Cartridge 7x10” | 2.31 |
| FIL07PM PP | PP | 45 | 35 | 85 | Paper 41xØ215 | 1.25 |
| FIL07C20M PP | PP | 45 | 35 | 115 | Cartridge 7x20” | 4.62 |
| FIL07P20M PP | PP | 45 | 35 | 115 | Paper 77xØ215 | 2.30 |
| FIL07C30M PP | PP | 45 | 35 | 145 | Cartridge 7x30” | 6.93 |
| FIL07C5M PVDF | PVDF | 45 | 35 | 85 | Cartridge 5x10” | 1.65 |
Standard Features
- Thermal overload switch
- Air release/drain valve
- Pressure gauge
Optional Features
- Dry run protector
- Hand priming pump
- Transport wheels
- Precoat tank PP:
- 10”xØ225 (10 liter)
- 20”xØ225 (20 liter)
Disclaimer
This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.