
Tóm tắt tài liệu kỹ thuật
SEPLITE MONOJET MB20
PDF datasheet mirror for SEPLITE MONOJET MB20 (SUNRESIN). Verify with OEM before design.
Summary
Product identification
- Product Name: SEPLITE® MB20
- Type: Mixed bed resin
- Stock Code: 300487
- Description: Ready to use mixed bed resin, consisting of strong acid cation and strong base type 1 anion resins. Components are prepared with a defined ratio of 1 volume of cationic component for 1.5 volumes of anionic component. Developed with components offering strong color difference for easy separation by backwashing. An optional color indicator for exhaustion monitoring is available upon request (SEPLITE® MB20 IND).
Physical and Chemical Characteristics
- Matrix Structure: Polystyrene Crosslinked with DVB
- Shipped form: H⁺/OH⁻
- Physical Appearance: Mixture of light yellow to dark brown spherical beads
- Cation/Anion ratio: 40:60
- Functional Group: Sulphonic acid and trimethylammonium
- Particle size: 0.315-1.25 mm
- Moisture content: 55-65 %
- Bulk Density: 700-740 g/l
- Density: 1100-1200 g/l
- While beads count: ≥95 %
Precautions
- Store in sealed containers or bags above 0℃ in dry conditions, away from direct sunlight.
- Do not mix with strong oxidizing agents.
- In case of eye contact, rinse immediately with plenty of water and consult a specialist.
- Dispose of materials according to local regulations.
- Dry polymers will expand when wetted and may cause an exothermic reaction.
- Spilled materials may be slippery.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.