
Tóm tắt tài liệu kỹ thuật
MC-10H
PDF datasheet mirror for MC-10H (Samyang Trilite). Verify with OEM before design.
Summary
Product identification
TRILITE® MC-10H is a UPS, SAC gel-type exchange resin supplied in its H⁺ form. It is a uniform particle size strong acid cation exchange resin.
Physical and Chemical Properties
- Matrix: Polystyrene+DVB, Gel
- Functional Group: Sulfonic acid
- Ionic Form: H⁺
- Total Capacity: 2.00 eq/ℓ (minimum)
- Shipping Density: 805 g/ℓ
- Moisture Retention: 45~51 %
- Particle Density: 1.22 g/ml
- Uniformity Coefficient: 1.1 (maximum)
- Particle Size: 660±50 µm
- Swelling Rate (Na⁺ → H⁺): 8 %
- Whole Beads: 95 % (minimum)
Recommended Operating Conditions
- Operating Temperature: 120 ℃ (maximum)
- pH Range: 0~14
- Bed Depth: 800 mm
- Service Flow Rate: 5~120 m/h
Regeneration
- Regenerant: HCl / H₂SO₄
- Concentration: HCl (4
10 %), H₂SO₄ (14 %) - Level: 50~200 g/ℓ
- Flow Rate: 2~10 m/h
- Rinse Requirement: 2~6 BV
Applications
TRILITE® MC-10H is used for softening, demineralization, and as a catalyst. It can be used for CPP (Condensate Polishing Plant) in conjunction with TRILITE® MA-10OH.
Hydraulic Characteristics
Figures 1 and 2 show backwash expansion as a function of flow rate and temperature. Figures 3 and 4 show pressure drop as a function of flow rate and water temperature. See the official PDF for exact tabulated values.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.