Tóm tắt tài liệu kỹ thuật
Ambersep 359
PDF datasheet mirror for Ambersep 359 (Rohm & Haas). Verify with OEM before design.
Summary
Product identification
- Product Name: AMBERSEP® 359
- Product Type: Inert Resin
AMBERSEP 359 is an inert material used as a spacer resin in all Ambersep units (three-component mixed bed). Its density and particle size are specifically designed to form an inert layer when backwashing an Ambersep unit.
Properties
- Appearance: White beads
- Matrix: Polyacrylic
- Moisture holding capacity: 13 % maximum
- Shipping weight: 45 lbs/ft³
- Harmonic mean size: 0.49 to 0.64 mm
- Uniformity coefficient: 1.5 maximum
- Operating pH range: 0 to 14
- Operating temperature: 160 °F maximum
- Swelling: 0
Test methods are available on request.
Limits of Use
AMBERSEP 359 is suitable for industrial use. For other specific applications such as pharmaceutical, food processing or potable water applications, it is recommended that all potential users seek advice from Rohm and Haas Company to determine the best resin choice and optimum operating conditions.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.