Tóm tắt tài liệu kỹ thuật
Ambersep 252 H
PDF datasheet mirror for Ambersep 252 H (Rohm & Haas). Verify with OEM before design.
Summary
Product identification
- Product Name: AMBERSEP 252 H
- Product Type: Industrial Grade Strong Acid Cation Exchanger
- Matrix: Styrene divinylbenzene copolymer
- Functional Groups: -SO₃⁻
- Physical form: Light grey beads
- Ionic form as shipped: H⁺
Properties
- Total exchange capacity: ≥ 1.65 eq/L (H⁺ form)
- Moisture holding capacity: 52 - 58 % (H⁺ form)
- Specific gravity: 1.18 to 1.22 (H⁺ form)
- Shipping weight: 755 g/L
- Particle size:
- Harmonic mean size: 0.90 - 1.10 mm
- Uniformity coefficient: ≤ 1.4
- Fines content (< 0.600 mm): 1.0 % max
- Coarse beads (> 1.180 mm): 10.0 % max
- Maximum reversible swelling: Na⁺ → H⁺ : 7 %
Suggested Operating Conditions
- Service flow rate: up to 120 BV*/h or 120 m/h
- Regenerants: HCl or H₂SO₄
- Regeneration Flow rate (BV/h): 4 to 5 (HCl) | 4 to 12 (H₂SO₄)
- Regeneration Concentration (%): 5 to 6 (HCl) | 1.5 to 4 (H₂SO₄)
- Regeneration Level (g/L): 80 to 200 (HCl) | 125 to 250 (H₂SO₄)
- Minimum contact time: 30 minutes
- Slow rinse: 2 BV at regeneration flow rate
- Fast rinse: 2 to 4 BV at service flow rate
* 1 BV (Bed Volume) = 1 m³ solution per m³ resin
Hydraulic Characteristics
- Pressure drop: Approximately 6 kPa/m bed depth per 10 m/h at 15°C.
- Backwash expansion: Approximately 70 % at 30 m/h and 15°C.
Limits of Use
AMBERSEP 252 H is suitable for industrial uses. For pharmaceutical, food processing, or potable water applications, consult Rohm and Haas for appropriate resin selection and operating conditions.
Disclaimer: Extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.