Tóm tắt tài liệu kỹ thuật
Amberlite PWA7
PDF datasheet mirror for Amberlite PWA7 (Rohm & Haas). Verify with OEM before design.
Summary
Product identification
AMBERLITE™ PWA7 Resin Drinking Water Grade Chromate Selective
AMBERLITE PWA7 resin is an anion exchange resin designed for the removal of chromate from drinking water.
Properties
- Matrix: Cross linked polycondensate
- Physical form: Cream coloured granules
- Total exchange capacity: ≥ 1.9 eq/L
- Moisture holding capacity: 58 – 68%
- Shipping weight: 610 kg/m³ (38 lb/ft³)
- Particle Size:
- Screen grading: 0.3 – 1.2 mm (16 – 50 mesh US Std Screens)
- Fines content (<0.300 mm): 3% max
Suggested Operating Conditions
- pH range: < 6.5
- Maximum operating temperature: 40 °C (105 °F)
- Minimum bed depth: 610 mm (24 inches)
- Typical service flow rate: 8 – 40 BV/hr* (1 – 5 gpm/ft³)
- *1 BV (Bed Volume) = 1 m³ solution per m³ resin
Commissioning and Limits of Use
AMBERLITE PWA7 resin is suitable for use in potable water applications after an initial commissioning upflow rinse of 20 bed volumes of water at ambient temperature at service flow rate. The operating capacity depends on operating and feed water conditions.
Hydraulic Characteristics
Pressure drop and bed expansion data are presented in figures (see official PDF). Pressure drop is valid at the start of the service run with clean water and a correctly classified bed.
Regulatory
AMBERLITE PWA7 resin is certified to ANSI / NSF Standard 61 for drinking water components for applications with minimum flow rates greater than or equal to 1.1 gpm/ft³. Resin products are manufactured in ISO 9001 certified facilities.
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.