Tóm tắt tài liệu kỹ thuật
Amberlite IRC86RF
PDF datasheet mirror for Amberlite IRC86RF (Rohm & Haas). Verify with OEM before design.
Summary
Product identification
- Product Name: AMBERLITE™ IRC86RF
- Type: Industrial Grade Weak Acid Exchanger
- Description: Gel type, high capacity weak acid cation exchange resin containing carboxylic acid groups. Principal application is dealkalization of industrial waters. Removes hardness associated with alkalinity when in the hydrogen cycle. Particle size is designed for packed bed and floating bed systems. Reduces acid regenerant consumption when used with a strong acid cation exchanger in demineralizer systems.
Properties
- Physical form: Clear amber spherical beads
- Matrix: Gel polyacrylic copolymer
- Functional group: Carboxylic acid
- Ionic form as shipped: H⁺
- Total exchange capacity [1]: ≥ 4.10 eq/L (H⁺ form)
- Moisture holding capacity [1]: 47 to 53 % (H⁺ form)
- Shipping weight: 790 g/L
- Particle size:
- Uniformity coefficient [1]: ≤ 1.5
- Harmonic mean size [1]: 0.600 to 0.800 mm
- < 0.300 mm [1]: 0.1 % max
- Reversible swelling [1]:
- H⁺ → Na⁺: ≤ 100 % (total conversion)
- H⁺ → Ca²⁺: ≤ 15 %
- H⁺ → Mg²⁺: ≤ 50 %
[1] Contractual value. Test methods are available on request.
Suggested Operating Conditions
- Maximum operating temperature: 100°C
- Minimum bed depth: 700 mm
- Service flow rate: 5 to 70 BV*/h
Regeneration
- Regenerant: HCl or H₂SO₄
- Level: 104 to 110 % of operating capacity
- Concentration (%):
- HCl: 2 to 5 %
- H₂SO₄: 0.5 to 0.7 %
- Minimum contact time: 30 minutes
- Rinse:
- Slow rinse: 2 BV at regeneration flow rate
- Fast rinse: 2 to 4 BV at service flow rate
* 1 BV (Bed Volume) = 1 m³ solution per m³ resin
Performance
Operating Capacity
Operating capacity is a function of analysis, temperature, and service flow rate. Engineering data sheet (EDS 0235 A) provides information for capacity calculation.
Regeneration
Readily regenerated with slightly over stoichiometric amounts of strong acids. If sulfuric acid is used, a low concentration (≤ 0.7 %) is advised to avoid calcium sulfate precipitation.
Limits of Use
- Not recommended for applications involving complete conversion between H⁺ and Na⁺ or NH₄⁺ forms due to high swelling.
- Suitable for industrial uses.
- For pharmaceutical, food processing, or potable water applications, consult Rohm and Haas for resin choice and operating conditions.
Hydraulic Characteristics
Bed expansion and pressure drop data are provided in graphical form (Figures 1 and 2) as a function of backwash/service flow rate and water temperature. Hydraulic curves are for H⁺ form resin.
Disclaimer: Extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.