Tóm tắt tài liệu kỹ thuật
Amberlite IR120 Na
PDF datasheet mirror for Amberlite IR120 Na (Rohm & Haas). Verify with OEM before design.
Summary
Product identification
- Product name: AMBERLITE™ IR120 Na
- Description: Industrial Grade Strong Acid Cation Exchanger
- Matrix: Styrene divinylbenzene copolymer
- Functional group: Sulfonate
- Ionic form as shipped: Na⁺
- Physical form: Amber spherical beads
Properties
- Total exchange capacity: ≥ 2.00 eq/L (Na⁺ form)
- Moisture holding capacity: 45 to 50 % (Na⁺ form)
- Shipping weight: 840 g/L
- Particle size:
- Uniformity coefficient: ≤ 1.9
- Harmonic mean size: 0.600 to 0.800 mm
- < 0.300 mm: 2 % max
- Maximum reversible swelling: Na⁺ → H⁺ ≤ 11 %
Suggested operating conditions
- Maximum operating temperature: 135 °C
- Minimum bed depth: 700 mm
- Service flow rate: 5 to 40 BV*/h
Regeneration
- Regenerant: HCl, H₂SO₄, NaCl
- Level (g/L): 50 to 150 (HCl), 60 to 240 (H₂SO₄), 80 to 250 (NaCl)
- Concentration (%): 5 to 8 (HCl), 0.7 to 6 (H₂SO₄), 10 (NaCl)
- Minimum contact time: 30 minutes
- Slow rinse: 2 BV at regeneration flow rate
- Fast rinse: 2 to 4 BV at service flow rate
* 1 BV (Bed Volume) = 1 m³ solution per m³ resin
Limits of use
AMBERLITE IR120 Na resin is suitable for industrial uses. For specific applications such as pharmaceutical, food processing, or potable water, consult Rohm and Haas for advice on resin choice and operating conditions.
Hydraulic characteristics
- Bed expansion data as a function of backwash flow rate and water temperature is shown in Figure 1.
- Pressure drop data as a function of service flow rate and water temperature is shown in Figure 2. Pressure drop data are valid at the start of the service run with clear water and a correctly classified bed.
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.