Tóm tắt tài liệu kỹ thuật
Amberjet 9000 (OH)
PDF datasheet mirror for Amberjet 9000 (OH) (Rohm & Haas). Verify with OEM before design.
Summary
Product identification
- Product Name: AMBERJET™ 9000 OH
- Description: Macroreticular Strong Base Anion Exchange Resin
- Application: Regenerable mixed bed condensate demineralizer systems, condensate polishing performance in PWR nuclear and high pressure fossil power plants.
- Matrix: Macroreticular styrene-divinylbenzene copolymer
- Functional Group: Quaternary ammonium
- Physical Form: Light tan opaque spherical beads
Properties
- Conversion to OH⁻ form: 93% minimum
- Total Exchange Capacity: 0.80 meq/ml minimum (OH⁻ form)
- Moisture Holding Capacity: 66 to 75% (OH⁻ form)
- Shipping Weight: 41.2 lb/ft³ (660 g/L)
- Particle size - Uniformity Coefficient: 1.25 maximum
- Particle size - Harmonic Mean Size: 0.58 to 0.70 mm
- Particle size - Retained on 20 mesh (0.850 mm): 5% maximum
- Particle size - Through 45 mesh (0.425 mm): 1% maximum
Suggested Operating Conditions
- Maximum Operating Temperature: 60 to 140 °F (15 to 60 °C)
- Service Flow Rate (Linear Velocity): 50 gpm/ft², maximum
Regeneration
- Regenerant: NaOH
- Level (100% basis): 8 to 15 lbs/ft³
- Flow Rate: 0.25 to 0.5 gpm/ft³
- Concentration: 4 to 6%
- Slow Rinse Volume (at regeneration flow rate): 8 to 15 gal/ft³
- Fast Rinse: 30 to 60 gal/ft³
Hydraulic Characteristics
- Pressure drop data are shown as a function of service flow rate and water temperature (Figure 1).
- Bed expansion data are shown as a function of backwash flow rate and water temperature (Figure 2).
Mixed Beds in Condensate Polishers
- Minimize re-separation of mixed beds by minimizing the volume of free water or transfer water used.
- A remix is recommended in the service vessel before use.
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.