Tóm tắt tài liệu kỹ thuật
Amberjet 1200
PDF datasheet mirror for Amberjet 1200 (Rohm & Haas). Verify with OEM before design.
Summary
Product identification
- Product name: AMBERJET™ 1200 H
- Product type: Industrial Grade Strong Acid Cation Exchanger
- Matrix: Styrene divinylbenzene copolymer
- Functional group: Sulfonate
- Ionic form as shipped: H⁺
Typical Properties
- Physical form: Amber spherical beads
- Total exchange capacity:
- ≥ 1.80 eq/L (H⁺ form)
- ≥ 2.00 eq/L (Na⁺ form)
- Moisture holding capacity (H⁺ form): 49 to 55%
- Shipping weight: 800 g/L
- Specific gravity (H⁺ form): 1.18 to 1.22
- Particle size:
- Uniformity coefficient: ≤ 1.2
- Harmonic mean size: 630 ± 50 µm
- Fines content (< 0.300 mm): 0.1% max
- Maximum reversible swelling: Na⁺ ⇌ H⁺ : 10%
Suggested Operating Conditions
- Maximum operating temperature: 135°C
- Minimum bed depth: 800 mm
- Service flow rate: 5 to 50 BV*/h
- Maximum service velocity: 60 m/h
Regeneration:
- Regenerant: HCl or H₂SO₄
- Level (g/L):
- HCl: 40 to 150
- H₂SO₄: 40 to 200
- Concentration (%):
- HCl: 4 to 10
- H₂SO₄: 1 to 8
- Minimum contact time: 20 minutes
- Slow rinse: 2 BV at regeneration flow rate
- Fast rinse: 1 to 3 BV at service flow rate
*1 BV (Bed Volume) = 1 m³ solution per m³ resin
Limits of Use
AMBERJET 1200 H resin is suitable for industrial uses. For specific applications such as pharmaceutical, food processing or potable water applications, seek advice from Rohm and Haas.
Hydraulic Characteristics
- Bed expansion is a function of backwash flow rate and water temperature (see Figure 1 in original document).
- Pressure drop data is a function of service flow rate and water temperature (see Figure 2 in original document). Pressure drop data is valid at the start of the service run with clear water and a correctly classified bed.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.