Quay lại ResinTech
ResinTech logo

Tóm tắt tài liệu kỹ thuật

SBG2 UPS

PDF datasheet mirror for SBG2 UPS (ResinTech). Verify with OEM before design.

Summary

Product Identification

  • Product Name: SBG2-UPS
  • Product Type: STRONG BASE ANION
  • Polymer Matrix: Styrenic Gel
  • Functional Group: Dimethylethanolamine
  • Ionic Form: Chloride
  • Physical Form: Spherical Beads
  • Particle Size: 20 to 40 US Mesh (400 - 841 μm)
  • Uniformity Coefficient: 1.25
  • Resin Type: Type II Anion, Polystyrene Gel

Operating Limits

  • Maximum Continuous Temperature: 170°F (77°C)
  • Operating pH Range: 0 to 14 SU
  • Maximum Pressure Loss: 20 psi

Feed Water

  • Suggested Operating Conditions: Contact ResinTech Technical Support for operation outside these guidelines.

Product Water

  • When used in chloride form for nitrate removal, product water pH may be reduced during the early part of the exhaustion cycle.

Electrical

  • No electrical specifications found.

Mechanical / Hydraulic

  • Minimum Bed Depth: 24 inches
  • Backwash Expansion: 25 to 50 percent
  • Service Flow Rate: 1 to 10 gpm/cu.ft.

Regeneration

  • Regenerant Concentration:
    • Hydroxide cycle: 2 to 6 percent NaOH
    • Salt cycle: 2 to 10 percent NaCl
  • Regenerant Level: 4 to 10 lbs./cu.ft.
  • Regenerant Flow Rate: 0.25 to 1.0 gpm/cu.ft.
  • Regenerant Contact Time: >40 minutes
  • Displacement Flow Rate: Same as dilution water
  • Displacement Volume: 10 to 15 gallons/cu.ft.
  • Rinse Flow Rate: Same as service flow
  • Rinse Volume: 35 to 60 gallons/cu.ft.

Typical Properties & Physical Characteristics

  • Capacity: 1.4 meq/mL
  • Moisture Retention: 40% to 53%
  • Reversible Swelling (Cl to OH): 12% to 15%
  • % < 50 mesh (300µm): < 0.5%
  • Minimum Sphericity: 95%
  • Shipping Weight: 43 - 45 lbs/ft³ (689 - 721 g/L)
  • Color: White to Yellow
  • Regenerability: Yes
  • Uniform Particle Size: Yes

Applications

  • Dealkalizer
  • Demineralization
  • Trace Contaminants (U, Cr, As, Se, F, ClO₄, ClO₃)
  • Nitrate Removal
  • Sulfate Removal

Packaging Options

  • 500 ml samples
  • 1 ft³ bags
  • 1 ft³ boxes
  • 1 ft³ drums
  • 7 ft³ drums
  • 42 ft³ supersacks

Disclaimer

This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.