
Tóm tắt tài liệu kỹ thuật
SBG2 H PH CO3
PDF datasheet mirror for SBG2 H PH CO3 (ResinTech). Verify with OEM before design.
Summary
Product Identification
- Product Name: SBG2-HP-HCO₃
- Product Type: STRONG BASE ANION, HIGH-PURITY GRADE, TYPE II ANION, POLYSTYRENIC GEL, BICARBONATE FORM
- Manufacturer: ResinTech, Inc.®
- Revision: 1.2
Typical Properties & Physical Characteristics
- Polymer Matrix: Styrenic Gel
- Ionic Form: Bicarbonate
- Functional Group: Dimethylethanolamine
- Physical Form: Spherical Beads
- Particle Size: 16 to 50 US Mesh (297 - 1190 μm)
- % < 50 mesh (300µm): < 1%
- Minimum Sphericity: 93%
- Uniformity Coefficient: 1.6
- Reversible Swelling (Cl⁻ to OH⁻): 12% to 15%
- Temperature Limit: 170°F (77°C)
- Capacity (meq/mL): 1.4
- Moisture Retention: 36% to 45%
- Shipping Weight: 43 - 45 lbs/ft³ (689 - 721 g/L)
- Color: White to Yellow
- Regenerability: Yes
Applications
- Potable Water
- Chloride Removal
Certifications
- WQA Gold Seal*
- NSF/ANSI/CAN 61: Drinking Water System Components - Health Effects
Packaging Options
- 1 ft³ bags
- 1 ft³ boxes
- 1 ft³ drums
- 7 ft³ drums
- 42 ft³ supersacks
Product Description
ResinTech SBG2-HP-HCO₃ is a high purity bicarbonate form type 2 gel strong base anion resin. The HP (high purity) designation means it is Gold Seal Certified by the WQA for use in potable water applications. SBG2-HP-HCO₃ is intended for use in potable water applications where a type 2 strong base anion resin is required, where an initial pH drop is undesirable, or where the release of chlorides is objectionable.
Disclaimer: This extracted summary may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.