Quay lại ResinTech
ResinTech logo

Tóm tắt tài liệu kỹ thuật

SBG1 OH

PDF datasheet mirror for SBG1 OH (ResinTech). Verify with OEM before design.

Summary

Product identification

  • Product Name: SBG1-OH
  • Product Line: ResinTech
  • Description: STRONG BASE ANION, TYPE I ANION, POLYSTYRENIC GEL, HYDROXIDE FORM
  • Revision: 1.1

Polymer Matrix & Functional Group

  • Polymer Matrix: Styrenic Gel
  • Functional Group: Trimethylamine
  • Ionic Form: Hydroxide

Physical Characteristics

  • Physical Form: Spherical Beads
  • Particle Size: 16 to 50 US Mesh (297 - 1190 μm)
  • % < 50 mesh (300µm): < 1%
  • Minimum Sphericity: 93%
  • Uniformity Coefficient: 1.6
  • Color: Yellow to Orange
  • Uniform Particle Size: Yes

Operating Limits

  • Maximum continuous temperature: 140°F (60°C)
  • Reversible Swelling (OH to Cl): -18% to -25%
  • Operating pH range: 0 to 14 SU

Performance

  • Capacity (meq/mL): 1.2
  • Moisture Retention: 52% to 60%
  • Regenerability: Yes

Feed Water / Applications

  • Applications: Demineralization, Anion Component in Mixed Beds
  • Intended Use: Industrial applications requiring hydroxide form anion resin, mixed beds, high operating temperatures, and low TDS polishing (e.g., RO permeate).

Suggested Operating Conditions

  • Minimum bed depth: 24 inches
  • Backwash expansion: 25 to 50 percent
  • Maximum pressure loss: 20 psi

Regenerant Specifications

  • Hydroxide cycle:
    • Regenerant Concentration: 2 to 6 percent NaOH
    • Regenerant level: 4 to 10 lbs./cu.ft.
    • Regenerant flow rate: 0.25 to 1.0 gpm/cu.ft.
    • Regenerant contact time: >40 minutes
  • Salt cycle:
    • Regenerant Concentration: 2 to 10 percent NaCl
  • Displacement:
    • Displacement flow rate: Same as dilution water
    • Displacement volume: 10 to 15 gallons/cu.ft.
  • Rinse:
    • Rinse flow rate: Same as service flow
    • Rinse volume: 35 to 60 gallons/cu.ft.
  • Service flow rate: 1 to 10 gpm/cu.ft.

Mechanical / Hydraulic

  • Shipping Weight: 41 - 43 lbs/ft³ (657 - 689 g/L)
  • Backwash Expansion Chart: Provides expansion in percent based on flow rate (gpm/sq.ft.) and temperature (40-100°F).
  • Pressure Loss Chart: Provides pressure loss in psi/ft. of Resin based on flow rate (gpm/sq.ft.) and temperature (40-100°F).

Packaging Options

  • 500 ml samples
  • 1 ft³ bags
  • 1 ft³ boxes
  • 1 ft³ drums
  • 7 ft³ drums
  • 42 ft³ supersacks

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.