
Tóm tắt tài liệu kỹ thuật
SBG1 F
PDF datasheet mirror for SBG1 F (ResinTech). Verify with OEM before design.
Summary
Product identification
- Product Name: SBG1-F
- Product Line: ResinTech
- Type: STRONG BASE ANION, FINE MESH, TYPE I ANION, POLYSTYRENIC GEL
- Ionic Form: Chloride
Polymer Matrix and Functional Group
- Polymer Matrix: Styrenic Gel
- Functional Group: Trimethylamine
Physical Characteristics
- Physical Form: Spherical Beads
- Particle Size: 30 to 50 US Mesh (297 - 595 μm)
- % < 50 mesh (300µm): < 5%
- Minimum Sphericity: 93%
- Uniformity Coefficient: 1.3
- Color: White to Yellow
Performance Characteristics
- Capacity (meq/mL): 1.4
- Moisture Retention: 42% to 51%
- Reversible Swelling (Cl to OH): 18% to 25%
- Regenerability: Yes
Operating Limits
- Maximum continuous temperature: 170°F (77°C)
- Operating pH range: 0 to 14 SU
- Maximum pressure loss: 20 psi (per foot of resin)
Suggested Operating Conditions
- Minimum bed depth: 24 inches
- Backwash expansion: 25 to 50 percent
- Regenerant Concentration (Salt cycle): 2 to 10 percent NaCl
- Regenerant level: 4 to 10 lbs./cu.ft.
- Regenerant flow rate: 0.25 to 1.0 gpm/cu.ft.
- Regenerant contact time: >40 minutes
- Displacement volume: 10 to 15 gallons/cu.ft.
- Rinse volume: 35 to 60 gallons/cu.ft.
- Service flow rate: 1 to 10 gpm/cu.ft.
Backwash Expansion and Pressure Loss
Graphical data is provided for backwash expansion and pressure loss as a function of flow rate and temperature. See the official PDF for exact tabulated values.
Packaging Options
- 1 ft³ bags
- 1 ft³ boxes
- 1 ft³ drums
- 7 ft³ drums
- 42 ft³ supersacks
Applications
- Chemical Purification
Shipping Weight
- 43 - 45 lbs/ft³ (689 - 721 g/L)
Disclaimer
This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.