
Tóm tắt tài liệu kỹ thuật
SBG1
PDF datasheet mirror for SBG1 (ResinTech). Verify with OEM before design.
Summary
Product Identification
- Product Name: SBG1
- Product Type: STRONG BASE ANION
- Functional Group: Trimethylamine
- Polymer Matrix: Styrenic Gel
- Ionic Form: Chloride
- Physical Form: Spherical Beads
- Revision: 1.0
Typical Properties & Physical Characteristics
- Particle Size: 16 to 50 US Mesh (297 - 1190 μm)
- % < 50 mesh (300µm): < 1%
- Minimum Sphericity: 93%
- Uniformity Coefficient: 1.6
- Reversible Swelling (Cl to OH): 18% to 25%
- Capacity (meq/mL): 1.4
- Moisture Retention: 42% to 51%
- Shipping Weight: 43 - 45 lbs/ft³ (689 - 721 g/L)
- Color: White to Yellow
- Regenerability: Yes
Operating Limits
- Maximum continuous temperature: 170°F (77°C)
- Operating pH range: 0 to 14 SU
- Maximum pressure loss: 20 psi
Feed Water
- Minimum bed depth: 24 inches
- Regenerant Concentration:
- Hydroxide cycle: 2 to 6 percent NaOH
- Salt cycle: 2 to 10 percent NaCl
- Regenerant level: 4 to 10 lbs./cu.ft.
- Regenerant flow rate: 0.25 to 1.0 gpm/cu.ft.
- Regenerant contact time: >40 minutes
- Displacement flow rate: Same as dilution water
- Displacement volume: 10 to 15 gallons/cu.ft.
Hydraulic Characteristics
- Backwash expansion: 25 to 50 percent
- Service flow rate: 1 to 10 gpm/cu.ft.
- Rinse flow rate: Same as service flow
- Rinse volume: 35 to 60 gallons/cu.ft.
Applications
- Demineralization
- Trace Contaminants (U, Cr, As, Se, F, ClO₄, ClO₃)
- Nitrate Removal
- Sulfate Removal
ResinTech SBG1 is a type 1 high solids gel strong base anion resin in chloride form. It is intended for the removal of contaminants such as nitrate, arsenate, chromate, and uranium. It exhibits high capacity and selectivity for various anions.
Certifications
- Halal Certified
- Kosher Certified
- FDA Compliance* * Paragraph 21CFR173.25 of the Food Additives Regulations of the US FDA
Packaging Options
- 500 ml samples
- 1 ft³ bags
- 1 ft³ boxes
- 1 ft³ drums
- 7 ft³ drums
- 42 ft³ supersacks
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.