
Tóm tắt tài liệu kỹ thuật
PX-A75-OH
PDF datasheet mirror for PX-A75-OH (ResinTech). Verify with OEM before design.
Summary
Product identification
- Product Name: PX-A75-OH
- Product Type: CATALYTIC MEDIA
- Manufacturer: ResinTech, Inc.
- Resin Type: WEAK BASE MACROPOROUS
- Ionic Form: Hydroxide
- Functional Group: Tertiary Amine
- Polymer Matrix: Styrenic Macroporous
- Revision: 1.2
Typical Properties & Physical Characteristics
- Physical Form: Spherical Beads
- Ionic Form: Hydroxide
- Percent in Hydroxide Form: > 99%
- Total Capacity: > 1.3 eq/l
- Moisture Content: 54 - 62 %
- Surface Area: > 35 m²/g
- Average Pore Volume: > 0.1 cc/g
- Average Pore Diameter: > 110 Angstroms
- Swelling: Approx. 77% in phenol
- Shipping Weight: Approx. 650 g/l
- Screen Size: 0.4 - 1.25 mm
Applications
- Acid neutralization from polar and non polar solutions
- Chromic acid neutralization and recovery from plating rinse water
- Insecticides scavenging from volatile oils (Dry version)
ResinTech PX-A75-OH is a weak base macroporous catalyst designed for aqueous and non-aqueous catalytic reactions within its structure. It is particularly effective for neutralizing mineral and organic acids, including formic acid in formaldehyde solutions. In its dry version (PX-A75-OH-D), it can be used for scavenging organophosphate and pyrethroid insecticides from volatile oils.
Suggested Operating Conditions
- Maximum operating temperature: 140˚F
- Maximum Pressure Loss: 15 psi across resin bed
- Minimum Depth: 24 inches
- Service Flow Rate: 0.5 - 5.0 bed volumes/hour
Note: These guidelines represent average low-risk operating conditions and are not absolute minimums or maximums. For operation outside these guidelines, contact ResinTech Technical Support.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.