
Tóm tắt tài liệu kỹ thuật
MBD-NANO
PDF datasheet mirror for MBD-NANO (ResinTech). Verify with OEM before design.
Summary
Product identification
- Product Name: MBD-NANO
- Product Type: MIXED BED
- Grade: NANO, ELECTRONICS GRADE, ULTRA-HIGH PURITY
- Ionic Form: Hydrogen & Hydroxide (H / OH FORM)
- Revision: 1.0
ResinTech MBD-NANO is a 2:3 volumetric mixture of CG8-H-BL (cation resin, hydrogen form) and SBG1P-OH (anion resin, hydroxide form). It is functionally tested to produce > 18 megohm resistivity and under 2 ppb of TOC. Intended for E-1.1 water applications requiring TOC of no more than 2 ppb and metals certification.
Typical Properties & Physical Characteristics
- Polymer Matrix: Styrenic Gel
- Functional Group: Sulfonic Acid / Trimethylamine
- Physical Form: Spherical Beads
- Particle Size: 16 to 50 US Mesh (297 - 1190 μm)
- % < 50 mesh (300µm): < 1%
- Reversible Swelling (H/OH to Na/Cl): -15% to -17%
- Temp Limit: 140°F (60°C)
- Capacity (meq/mL): 0.55
- Moisture Retention: 53% to 62%
- Shipping Weight: 42 - 44 lbs/ft³ (673 - 705 g/L)
- Color: Brown / Black & Amber
- Regenerability: Yes
Suggested Operating Conditions
- Maximum continuous temperature: 140°F
- Maximum intermittent temperature: 180°F
- Minimum bed depth: 24 inches
- Maximum pressure loss: 25 psi
- Operating pH range: 2 to 12 SU
- Service flow rate (Working): 1 to 5 gpm per cu. ft.
- Service flow rate (Polishing): 3 to 15 gpm per cu. ft.
Note: These are average low risk guidelines, not absolute minimums or maximums. Contact ResinTech Technical Support for operation outside these guidelines.
Maximum Impurities
-
Metallic Impurities (moist basis):
- Sodium (Na) ppm: < 40
- Iron (Fe) ppm: < 50
- Copper (Cu) ppm: < 10
- Aluminum (Al) ppm: < 30
- Calcium (Ca) ppm: < 30
- Magnesium (Mg) ppm: < 30
- Heavy metals (Pb) ppm: < 10
-
Anionic Impurities:
- Equivalent percent Chloride (% Cl): < 0.2
- Equivalent percent Sulfate (% SO₄): < 0.2
- Equivalent percent Hydroxide (% OH): > 95
-
Leachable TOC (total organic carbon):
- 25 BV rinse (at 0.5 BV/min): Max 25 ppb TOC
- 50 BV rinse: Max 5 ppb TOC
- 100 BV rinse: Max 1 ppb TOC
Lot certification is available when specified in the purchase agreement.
Applications
- Cartridge Applications
- Portable Exchange Deionization (PEDI)
- High Temperature Applications
- In Place Regeneration
Packaging Options
- 500 ml samples
- 1 ft³ bags
- 1 ft³ boxes
- 1 ft³ drums
- 7 ft³ drums
- 42 ft³ supersacks
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.