Quay lại ResinTech
ResinTech logo

Tóm tắt tài liệu kỹ thuật

CG8 C HP

PDF datasheet mirror for CG8 C HP (ResinTech). Verify with OEM before design.

Summary

Product identification

  • Product Name: CG8-C-HP
  • Product Line: ResinTech
  • Type: STRONG ACID CATION
  • Grade: HIGH-PURITY GRADE
  • Description: COARSE MESH POLYSTYRENIC GEL, 8% CROSSLINKED, SODIUM FORM

Typical Properties & Physical Characteristics

  • Polymer Matrix: Styrenic Gel
  • Ionic Form: Sodium
  • Functional Group: Sulfonic Acid
  • Physical Form: Spherical Beads
  • Particle Size: 16 to 30 US Mesh (595 - 1190 μm)
  • % < 50 mesh (300µm): < 1%
  • Minimum Sphericity: 93%
  • Uniformity Coefficient: 1.4
  • Reversible Swelling (Na to H): 5% to 9%
  • Capacity (meq/mL): 2.0
  • Moisture Retention: 42% to 49%
  • Shipping Weight: 51 - 53 lbs/ft³ (817 - 849 g/L)
  • Color: Amber
  • Regenerability: Yes

Operating Limits

  • Maximum continuous temperature: 280°F (138°C)
  • Operating pH range: 0 to 14 SU

Feed Water (Implied by applications and certifications)

  • Potable Water Applications: Certified for use in potable water applications (WQA Gold Seal Certified).

Product Water (Implied by applications and certifications)

  • Potable Water Applications: Suitable for potable water applications.

Electrical

  • No electrical specifications provided.

Mechanical / Hydraulic

  • Minimum bed depth: 24 inches
  • Backwash Expansion: 25 to 50 percent
  • Maximum pressure loss: 25 psi

Suggested Operating Conditions

  • Backwash Expansion:
    • 3.0 gpm/sq.ft. at 40°F yields 0% expansion
    • 6.0 gpm/sq.ft. at 60°F yields 20% expansion
    • 9.0 gpm/sq.ft. at 80°F yields 40% expansion
    • 12.0 gpm/sq.ft. at 100°F yields 60% expansion
  • Pressure Loss:
    • 5.0 gpm/sq.ft. at 40°F yields 0.4 psi / ft. of Resin
    • 10.0 gpm/sq.ft. at 60°F yields 0.8 psi / ft. of Resin
    • 15.0 gpm/sq.ft. at 80°F yields 1.2 psi / ft. of Resin
    • 20.0 gpm/sq.ft. at 100°F yields 2.0 psi / ft. of Resin
  • Regenerant Concentration (Salt cycle): 10 to 15 percent NaCl
  • Regenerant level: 4 to 15 lbs./cu.ft.
  • Regenerant flow rate: 0.5 to 1.5 gpm/cu.ft.
  • Regenerant contact time: >20 minutes
  • Displacement flow rate: Same as dilution water
  • Displacement volume: 10 to 15 gallons/cu.ft.
  • Rinse flow rate: Same as service flow
  • Rinse volume: 35 to 60 gallons/cu.ft.
  • Service flow rate: 1 to 10 gpm/cu.ft.

Applications

  • Softening - High Flow Rate
  • Softening - Residential

Certifications

  • WQA Gold Seal (NSF/ANSI/CAN 61: Drinking Water System Components - Health Effects)
  • Kosher Certified
  • FDA Compliance (Paragraph 21CFR173.25 of the Food Additives Regulations of the US FDA)

Packaging Options

  • 1 ft³ bags
  • 1 ft³ boxes
  • 1 ft³ drums
  • 7 ft³ drums
  • 42 ft³ supersacks

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.