Quay lại ResinTech
ResinTech logo

Tóm tắt tài liệu kỹ thuật

CG8 BL

PDF datasheet mirror for CG8 BL (ResinTech). Verify with OEM before design.

Summary

Product identification

  • Product Name: CG8-BL
  • Product Type: Strong Acid Cation Resin
  • Polymer Matrix: Styrenic Gel
  • Crosslinking: 8%
  • Functional Group: Sulfonic Acid
  • Ionic Form: Sodium
  • Color: Dark Brown to Black (Black Polystyrenic Gel)
  • Revision: 1.2

Typical Properties & Physical Characteristics

  • Physical Form: Spherical Beads
  • Particle Size: 16 to 50 US Mesh (297 - 1190 μm)
  • % < 50 mesh (300µm): < 1%
  • Minimum Sphericity: 93%
  • Uniformity Coefficient: 1.6
  • Capacity (meq/mL): 2.0
  • Moisture Retention: 42% to 49%
  • Shipping Weight: 51 - 53 lbs/ft³ (817 - 849 g/L)
  • Reversible Swelling (Na to H): 5% to 9%
  • Regenerability: Yes

Operating Limits

  • Maximum continuous temperature: 280°F (138°C)
  • Operating pH range: 0 to 14 SU

Feed Water

  • Iron Removal: Feedwater iron content should not be more than 1 mg/L Fe per each 17 mg/L of hardness.
  • Ammonia Removal: Ammonia is not well removed when the pH is significantly alkaline (above 9).

Suggested Operating Conditions

  • Minimum bed depth: 24 inches
  • Backwash expansion: 25 to 50 percent
  • Maximum pressure loss: 25 psi

Regeneration (Sodium Cycle)

  • Regenerant Concentration: 10 to 15 percent NaCl
  • Regenerant level: 4 to 15 lbs./cu.ft.
  • Regenerant flow rate: 0.5 to 1.5 gpm/cu.ft.
  • Regenerant contact time: >20 minutes
  • Displacement volume: 10 to 15 gallons/cu.ft.
  • Rinse volume: 35 to 60 gallons/cu.ft.

Regeneration (Hydrogen Cycle)

  • Regenerant Concentration: 5 to 10 percent HCl or 1 to 8 percent H₂SO₄
  • Regenerant flow rate: 0.5 to 1.5 gpm/cu.ft.
  • Regenerant contact time: >20 minutes
  • Displacement volume: 10 to 15 gallons/cu.ft.
  • Rinse volume: 35 to 60 gallons/cu.ft.

Service Flow Rate

  • Service flow rate: 1 to 10 gpm/cu.ft.

Mechanical / Hydraulic

  • Backwash Expansion: See the official PDF for exact tabulated values.
  • Pressure Loss: See the official PDF for exact tabulated values.

Applications

  • Softening - Industrial
  • Demineralization
  • Iron Removal
  • Ammonia Removal
  • Recommended for mixed beds where its dark color distinguishes it from amber-colored anion resins.

Certifications

  • Kosher Certified
  • Halal Certified
  • FDA Compliance* (Paragraph 21CFR173.25 of the Food Additives Regulations of the US FDA)

Packaging Options

  • 1 ft³ bags
  • 1 ft³ boxes
  • 1 ft³ drums
  • 7 ft³ drums
  • 42 ft³ supersacks

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.