Quay lại ResinTech
ResinTech logo

Tóm tắt tài liệu kỹ thuật

CG8

PDF datasheet mirror for CG8 (ResinTech). Verify with OEM before design.

Summary

Product identification

  • Product Name: CG8
  • Product Type: STRONG ACID CATION resin
  • Manufacturer: ResinTech, Inc.®
  • Polymer Matrix: Styrenic Gel
  • Crosslinking: 8%
  • Ionic Form: Sodium

Typical Properties & Physical Characteristics

  • Functional Group: Sulfonic Acid
  • Physical Form: Spherical Beads
  • Particle Size: 16 to 50 US Mesh (297 - 1190 μm)
  • % < 50 mesh (300µm): < 1%
  • Minimum Sphericity: 93%
  • Uniformity Coefficient: 1.6
  • Reversible Swelling (Na to H): 5% to 9%
  • Capacity (meq/mL): 2.0
  • Moisture Retention: 42% to 49%
  • Shipping Weight: 51 - 53 lbs/ft³ (817 - 849 g/L)
  • Color: Amber
  • Regenerability: Yes

Operating Limits

  • Maximum continuous temperature: 280°F (138°C)
  • Operating pH range: 0 to 14 SU

Feed water

  • Iron Removal: Iron content in the feedwater should not be more than 1 mg/L Fe per each 17 mg/L of hardness.
  • Ammonia Removal: Ammonia is not well removed when the pH is significantly alkaline (above 9).

Product water

  • Softening Capacity (Typical): See the official PDF for exact tabulated values.

Mechanical / Hydraulic

  • Minimum bed depth: 24 inches
  • Backwash expansion: 25 to 50 percent (See the official PDF for expansion curves based on flow rate and temperature)
  • Maximum pressure loss: 25 psi (See the official PDF for pressure loss curves based on flow rate and temperature)
  • Service flow rate: 1 to 10 gpm/cu.ft.

Suggested Operating Conditions

  • Regenerant Concentration:
    • Hydrogen cycle: 5 to 10 percent HCl or 1 to 8 percent H₂SO₄
    • Salt cycle: 10 to 15 percent NaCl
  • Regenerant level: 4 to 15 lbs./cu.ft.
  • Regenerant flow rate: 0.5 to 1.5 gpm/cu.ft.
  • Regenerant contact time: >20 minutes
  • Displacement volume: 10 to 15 gallons/cu.ft.
  • Rinse volume: 35 to 60 gallons/cu.ft.

Packaging Options

  • 500 ml samples
  • 1 ft³ bags
  • 1 ft³ boxes
  • 1 ft³ drums
  • 7 ft³ drums
  • 42 ft³ supersacks

Applications

  • Softening - Industrial
  • Demineralization
  • Iron Removal
  • Ammonia Removal

Certifications

  • WQA Gold Seal (NSF/ANSI/CAN 61: Drinking Water System Components - Health Effects)
  • Kosher Certified
  • Halal Certified
  • FDA Compliance (Paragraph 21CFR173.25 of the Food Additives Regulations of the US FDA)

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.