
Tóm tắt tài liệu kỹ thuật
CG10 C
PDF datasheet mirror for CG10 C (ResinTech). Verify with OEM before design.
Summary
Product identification
- Product Name: CG10-C
- Product Type: STRONG ACID CATION
- Grade: COARSE MESH POLYSTYRENIC GEL
- Crosslinking: 10% CROSSLINKED
- Ionic Form: SODIUM FORM
- Manufacturer: ResinTech, Inc.
Physical and Chemical Characteristics
- Polymer Matrix: Styrenic Gel
- Functional Group: Sulfonic Acid
- Physical Form: Spherical Beads
- Particle Size: 16 to 30 US Mesh (595 - 1190 μm)
- % < 50 mesh (300µm): < 1%
- Minimum Sphericity: 93%
- Uniformity Coefficient: 1.4
- Reversible Swelling (Na to H): 4% to 8%
- Moisture Retention: 39% to 45%
- Shipping Weight: 52 - 54 lbs/ft³ (833 - 865 g/L)
- Color: Amber
- Regenerability: Yes
Operating Limits
- Maximum continuous temperature: 280°F (138°C)
- Operating pH range: 0 to 14 SU
- Maximum pressure loss: 25 psi
Suggested Operating Conditions (Salt Cycle)
- Minimum bed depth: 24 inches
- Backwash expansion: 25 to 50 percent
- Regenerant Concentration: 10 to 15 percent NaCl
- Regenerant level: 4 to 15 lbs./cu.ft.
- Regenerant flow rate: 0.5 to 1.5 gpm/cu.ft.
- Regenerant contact time: >20 minutes
- Displacement flow rate: Same as dilution water
- Displacement volume: 10 to 15 gallons/cu.ft.
- Rinse flow rate: Same as service flow
- Rinse volume: 35 to 60 gallons/cu.ft.
- Service flow rate: 1 to 10 gpm/cu.ft.
Applications
- Softening - Industrial
- Demineralization
- Softening - High Flow Rate
Packaging Options
- 1 ft³ bags
- 1 ft³ boxes
- 1 ft³ drums
- 7 ft³ drums
- 42 ft³ supersacks
Backwash Expansion Graph
See the official PDF for exact tabulated values.
Pressure Loss Graph
See the official PDF for exact tabulated values.
Softening Capacity Graph
See the official PDF for exact tabulated values.
Disclaimer
This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.