Quay lại Purolite
Purolite logo

Tóm tắt tài liệu kỹ thuật

Purolite MB378LT

PDF datasheet mirror for Purolite MB378LT (Purolite). Verify with OEM before design.

Summary

Product identification

  • Product Name: Purolite MB378LT
  • Product Type: Polystyrenic Gel, Gel, Mixed Bed Resin, Hydrogen form, Hydroxide form

Operating limits

  • Temperature Limit, Non-Regenerable Bed: 100 °C (212.0 °F)
  • Temperature Limit, Regenerable Bed: 60 °C (140.0 °F)

Feed water

This product is intended for use in non-regenerable mixed bed systems.

Product water

Typical Physical & Chemical Characteristics

  • Appearance: Spherical Beads
  • Moisture Content (max.): 65 %
  • Particle Size Range: 300 - 1200 µm
  • < 300 µm (max.): 1 %
  • Uniformity Coefficient (max.): 1.7
  • Shipping Weight (approx.): 705 - 740 g/L (44.1 - 46.2 lb/ft³)

Component Characteristics

Component NamePolymer StructureFunctional GroupIonic Form
Gel Strong Acid CationGel polystyrene crosslinked with divinylbenzeneSulfonic AcidH⁺ form
Gel Type I Strong Base AnionGel polystyrene crosslinked with divinylbenzeneType I Quaternary AmmoniumOH⁻ form
  • Cation / Anion Volumetric Ratio: 40 % / 60 %

Systems

  • Non-Regenerable
  • Mixed Bed

Principal Applications

  • Demineralization - Electrical Discharge Machining

Advantages

  • Light color cation

Typical Packaging

  • 1 ft³ Sack
  • 25 L Sack
  • 5 ft³ Drum (Fiber)

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.