
Tóm tắt tài liệu kỹ thuật
Purolite C160S
PDF datasheet mirror for Purolite C160S (Purolite). Verify with OEM before design.
Summary
Product Identification
- Product Name: Purolite C160S
- Product Type: Polystyrenic Macroporous, Strong Acid Cation Resin, Sodium form, High Capacity
- Polymer Structure: Macroporous polystyrene crosslinked with divinylbenzene
- Appearance: Spherical Beads
- Functional Group: Sulfonic Acid
- Ionic Form: Na⁺ form
Typical Physical & Chemical Characteristics
- Total Capacity: 2.3 eq/L (50.3 Kgr/ft³) (Na⁺ form)
- Moisture Retention: 35 - 40 % (Na⁺ form)
- Particle Size Range: 425 - 1200 µm
- Particles < 425 µm (max.): 2 %
- Uniformity Coefficient (max.): 1.6
- Reversible Swelling, Na⁺ → H⁺ (max.): 4 %
- Specific Gravity: 1.3
- Shipping Weight (approx.): 820 - 860 g/L (51.2 - 53.8 lb/ft³)
- Temperature Limit (H⁺ form): 120 °C (248.0 °F)
- Temperature Limit (Na⁺ form): 140 °C (284.0 °F)
Principal Applications
- Citric acid
- Lactic acid
Advantages
- Excellent resistance to osmotic and thermal shock
Hydraulic Characteristics
Backwash
- Resin bed should be expanded between 50 and 70% during up-flow backwash for at least 10 to 15 minutes.
- Expansion helps free particulate matter, clear the bed of bubbles and voids, and reclassify resin particles.
- Initial classification may require approximately 30 minutes of expansion.
- Bed expansion increases with flow rate and decreases with influent fluid temperature.
- Caution: Avoid resin loss through the top of the vessel by over-expansion.
Pressure Drop
- Pressure drop depends on particle size distribution, bed depth, voids volume, flow rate, and influent solution viscosity.
- Factors like filtered particulate matter, abnormal resin compressibility, or incomplete bed classification can increase head loss.
- Service flow rates may vary from 10 to 40 BV/h depending on influent water quality, application, and plant design.
Typical Packaging
- 1 ft³ Sack
- 25 L Sack
- 5 ft³ Drum (Fiber)
- 1 m³ Supersack
- 42 ft³ Supersack
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.